Blower motor pigtail

Anyone know where I can get a blower motor pigtail for a 2015? Rigged it up for the time being. Won’t last but a month maybe.

 

Part numbers, srry if TW decides to add Amazon links:

Connector Housing:

$13 90980-10916 6" 12ga Harness New

90980-10916
Terminal (2 required):

$10 82998-12380 90980-10916, 6"es 12 Gauge Wire Harness

82998-12380

You can get them on amazon/ebay but those are made pretty cheaply.

 

Ok, i was just going to post the part numbers to him when i bought my parts. I see you already did that. What my dealer did when i had to replace mine is they sold me the connector and then gave me 2 10gauge wires with the plugs to snap in. I didnt realize this @Dm93, they charged me even with a discount for those toyota butt connectors $8 a piece. I didnt even use em. They arnt even heat shrink. For the butt connectors, just go to any parts store and youll get a couple heat shrink ones for like $10.

 

Yea, the part numbers I posted are for the connector body and the terminals.

The butt connectors are 82999-12030 no need to buy them.

 

Thanks! Ordered.

 

I literally went through a mess just about a month or so ago with mine. My plug got melted really bad. Caused it to be loose on the motor. Had to replace my whole plug, motor. I want to thank @Dm93 because when mine went out, he pretty much told me what to do and I did it. I'll send you a link to my write up I made if you wanna bullet proof the ac systems in these. Dm93s links are in their for the write ups he made on the common issues with these and how to diag them.

https://www.tacomaworld.com/threads/no-air-from-hvac.832326/

 

Great stuff! Appreciate you both helping out.

 

That's what we hang out on here for. If you run high a lot, take @Dm93 advice on wiring in a relay. 18-20amps is a lot for the fan switch. The link to that write up is in their. It will take the load off the switch when on high