Will 2019 manual seats fit in a 2015 manual?

From my research I am aware that the seats will bolt into my 2015 both front and rear.

What I can not find is if the passenger air bag system on my 2015 will be compatible with the wiring on the 2019 seat and work without modification?

I can not be the first considering this swap! All help appreciated.

 

Check to see if both trucks use the same occupant detection computer. That is a good start to answering your question. You can just use the VINs to check online if you don't have one of the two (or both) trucks physically in front of you.

 

It’s been done 3rd gen seats in a 2nd gen. Front and rear.

 

https://www.tacomaworld.com/threads/3rd-gen-seats-in-2nd-gen.467659/page-6

 

Unfortunately I do not have access to the vin of the other truck or the truck itself as just the seats are being sold.

 

Well aware it can be done, but this does not answer weather a 2019 seat will work as is with my existing 2015 air bag system

 

Well aware as stated at the start of my post, the question is…….will a 2019 seat work with my existing air bag system? Is the 2019 seat plug and play in my 2015?

 

Look under the passenger seat from the 2019, specifically the occupant detection computer. See if the part number matches the part number of the same computer on your original passenger seat. You most likely have 89952-35011 in your original passenger seat.

If the seller of the 2019 seats removed the computer, then I wouldn't even buy the seats to begin with because who knows what else was removed. Some people do this when they do a seat swap. I know I had to when I did my own seat swap.