Damaged hard top bed cover.

Today I broke my bed cover. I folded one section back and put some barrels on the end. Wind lifted it back and when it did it hit the barrels and bounced back again and slammed down hard damaging the top bad. So my question is can just the top plastic part be replaced?
thanks in advance…..



EDIT! This is a long bed cover….

Another edit:
So, I got the new center panel in to replace the one I ruined. Are there any videos or tips or tricks? I looked it over pretty good and it looks like a possible two person project. Thoughts?


Thanks, Brian

 

Maybe contact who you bought it from or the manufacturer instead of asking with no detailed info on a forum.

 

Man, that is some damage! If that is the OEM cover, I am not sure if you can buy a single panel? But if you can, I am guessing it won't be cheap. I think your best bet would be to look on FBMP or local CL for a used one. Your truck is already set up for it, so a used one would go right on with nothing else to do. Good luck brother.

 

See post #32 for a parts schematic
https://www.tacomaworld.com/threads/oem-tonneau-cover-install.444415/page-2


https://www.toyotapartsdeal.com/oem/toyota~panel~s~a~set~tonne~64903-09010.html

 

Got it , thanks

 

Add up the cost of replacement parts vs. buying a used whole OEM cover...

 

that OEM cover sucks anyway. Get a bakflip

 

I think that link I sent earlier might the last panel.
This vendor has a better diagram that shows the mid panel but I’ve never heard of them.
https://www.oemgenuineparts.com/oem-parts/toyota-tonneau-cover-6490209010?srsltid=AfmBOop_Z8WGC1KDWx8VxNpAlN5q7QyK6DRKwUIJ7CVF5ZYH0XsHqfiJ

that’s surprisingly not as expensive as I would have thought especially if it’s complete. I spent about that much for my mounting hardware when I bought a used OEM tonneau.

 

I was able to replace a the rear section of my OEM tonneau cover for around $ 224, easy fix, just need to find the part number for the section

 

Thanks and yes it was the rear section you sent and not as expensive as I thought. Having trouble getting part number off that first link for the center piece.

 

The issue will be it not matching , the sun im sure faded it some. I would the complete panel minus hardware or a good used one .
There is always aftermarket also

 

64902-09010

2016-2023 Toyota Tacoma Tonneau Cover 64902-09010 | Toyota Parts Center

 

6490209010 - Toyota Truck Bed Lid. 5 FT BED, center | Toyota Parts Overstock, Lakeland FL

 

Short bed or long bed? I’m in NH and have an great condition Extang trifold I’m looking to sell for a long bed…

 

I think previous owners had it garaged so it’s not really faded and I’ve had mine for a year outside….. guess we’ll see

 

My Son's OEM cover got damaged when we had to force it open because the tailgate was loced shut. Only way was to break the cover. The OEM cover is the best looking and most sturdy cover I have seen. So we knew it could be replaced and found one on FB for $200. Brand new, taken off and put in the garage. Got luck and they are out there.

 

Long bed
I bed
I need to edit my initial post…..

 

I can send you some pictures tonight of mine if youre interested. Great condition, no torn weather stripping, all hinges work etc. Its an Extang SolidFold 2.0. Selling it because I purchased a Leer cap.

 

I checked that website and and found it for $230 or something. I called and was told to call back Monday ask about the shipping because it might have to go as freight, which was like $115 and wouldn’t make any sense at all . Better off driving 5 minutes away for $330 at dealership