What have you done to your Tacoma today? 1st Gen Edition

i think im still going to leave it. then i would have a two tone, black and washed out black bumper.

...and there might be plans for an off road bumper soon, so im not worried.

 

Removed the air snorkel from the airbox and the filter from the airbox, and shot the
MAF sensor at both ends with MAF cleaner. Cleaned the batt terminals and cable connectors while they were disconnected for the MAF cleaning.
Since I did the elbow mod awhile back, I removed the marker light on that side and tied back the 2 wiring harnesses that run right through the air flow area from the front bumper, so that there is that much more air pushing towards the intake hole, then reinstalled the marker light. Don't know if that made a hair of difference, but everything I did combined made the ol butt dyno happier

 

B&M 70268 installed.

 

Unplug the 4wd sensor on your t case. IT wont tell your ADD to lock unless you manualy do it. Similar to the Grey wire mod, but for 4WD instead of the locker.

 

Took off all those stickers. Jus got the TW one on now

 

Pic

 

I use it more in boston traffic than on the trails. Its nice to not have to clutch all the time in heavy traffic. Probably my favorite mod ever.

 

i dont understand what this mod does....can some one explain better? sorry for being stupid lol

 

Lets you put the Transfercase in Low range without activating 4wd. You can turn easyier on tight trails. Or crawl along in traffic without the front end engaged.

 

Could you post some pics of it and how it mounts to bed? I really need to get a rack for ladders.

 

Put a bettery tray and holder in. No more bungee chord for me!

 

so you would drive through traffic in 4 lo?

 

You drive an auto dont you? Ever try to drive a stick through stop an go traffic? Clutch in/clutch out,Clutch in/clutch out,Clutch in/clutch out,Clutch in/clutch out. In Low range you can just coast at 1mph.

 

no i got a stick. but when there is traffic here its stand still so i usually just cut the truck off...but i get it now thanks

 

Took it to go fishing. Also made up sleeping platform.

Getting a quote for dents to be taken out tomorrow!

 

That's cool! Its basically 2lo. But how to do you switch to it?

 

what dents?

 

For the push button 4wd all you have to do is unplug a little blue plug on the driver side of the trasfercase. Is takes about 3sec to do this mod and its awesome. The J shifter guys have to do it another way.

 

did an oil change and installed my new 3 rod fishing rod holders onto my toolbox in the bed