WTS '03 4wd TRD xtra cab V-6

Original owner selling my Tacoma, it has; V-6, 4wd, TRD Off-Road pkg, 5 spd standard transmission, cloth bucket seats, power windows, remote power locks, tilt, cruise, a/c, am/fm cd/cass radio, leather wrapped wheel and shifter handle, rear sliding window, rear seat area has platform and newer 6x9 speakers in custom boxes, standard bed with low profile tool box, back rack, tow hitch, skidrow front skidplate and KC driving lights. Truck had the frame replaced by Toyota couple of years ago which included, new brake lines, new fuel lines, new rear springs, new lower control arms. Truck is equipped with Bilstein 5100 series shocks and has a slight lift in front and rear. Truck comes with studded snows on 4-runner wheels and Dura-trac radials on American Racing wheels. Tires are 265/75/16. There is slight pitting on the front bumper and some rust on the edge of the front bumper. The tailgate has a small amount of rust as well. The truck had one run in with a deer on the passenger side which was professionally repaired. Truck has 151,000+ miles. I have used synthetic oil since day one and the truck runs great. I can e-mail more pics if wanted. I am in west central NH close to I-91 and not too far from I-93. asking $12,500 obo also many more photos available and can e-mail them if anyone wants.

 

Nice looking truck! GLWS!

Do you have a price in mind?

 

Yeah, I'm a genius... I copied my craigslist ad in which I had the price in the title, thanks for the clue asking $12500 obo

 

Switched out the standard tool box with no keys (being sold here now also) and put in a low profile box with the backrack , now you can see out the rear window better.

 

Price Drop... $ 11,995... thanks for looking

 

I like that back platform idea. What is it made out of??

 

I cut a piece of MDF board to size and used two pieces of 4x4 post cut to the correct height to match the rear platform under the seats as supports. The 4x4 support the weight of the mdf and are located on the front two corners of the mdf. The rubber mat is a "calf mat" from agway, basically a 4x6 foot piece of 3/4" rubber mat cut to fit. It all works well, downside is you lose access to the jack cubby and the other cubby, put those things in my tool box.

 

Still looking to sell, will consider offers over $9000 Thanks !

 

bump

 

love it, id buy it from you right now but I'm deploying to afghanistan for a year in january...

 

I plan on pushing the sale come spring time but right now I use it to get to work because of the studded snows... I only drive 6 miles oneway so it won't be a lot more miles. Good luck and be safe!

 

Forwarding link to my dad. You might just have a sale on your hands.

 

I hope he is a little closer than Anchorage...

 

Nope.

 

This great, awesome truck is still up for sale...! Offers over $8500 will be considered. Thanks for looking!

 

You're in New Hampshire? Located in North Carolina. Looks like a great truck, but how is it as far as rust? I know you said the frame was replaced. $8,500 is a GREAT price on an impossible to find truck.

 

Rust is minimal, the front bumper has a few spots that started underneath the plastic grill valance, the rear bumper has a few small rusty spots near the unused ball mount, the tailgate has some rust along the top and bottom edges and underneath the doors at the pinchweld there is some surface rust. When I write this it sounds horrible but it really isn't that bad, I'll post some pics tonight or tomorrow.

 

You should post your truck on Craigslist here in CO. Based on prices out here you could sell that thing easily and someone would fly out and pick it up! Just a thought!

GLWS

 

If you still have this for sale in a couple months, I'll pick it up. Can't believe it hasn't sold yet. Can't get a nice Taco around here for any reasonable price.

 

Take your time--do not LOWER it too much-BE PATIENT--10K is a decent price. Give it time yo sell.