1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: ISO: Seattle-Tacoma Area Techstream for Hire Best tires for the northwest? Searching for hire F&R Bilstein installation Seattle/Tacoma area FS: WaterPort/Anytime GPS kit/OCD center tray (Seattle) Portland Auto Locksmith Recommendations Washington State "Wild Roads" book

Idaho BS thread in the PNW

Discussion in 'North West' started by Jensonbt, Aug 28, 2011.

Page 919 of 3002
  1. Oct 9, 2012 at 10:16 PM
    #18361
    mr.trd

    #18361
    mr.trd Are you Recreationally Insane?

    Joined:
    Jul 9, 2008
    Member:
    #7842
    Messages:
    1,444
    Gender:
    Male
    First Name:
    Brant
    Pocatello, Idaho
    Vehicle:
    '06 S/C 1GR-FE DCSB
    Icon coilovers w 14" 700lb springs, Icon billet UCA w/ Delta joints, custom built Icon rear resi-shocks, Icon stage 3 rear leaf pack, Archive Garage Hammer Hangers w/ homemade spreader bar, superbumps up front and timbren bumps in the rear, Crown brake lines, U-bolt flip,4.88's with front ARB locker and ARB dual compressor mounted behind back seat, 285/75R17 BFG A/T KO2's on Bronze Icon Alloy Compression's, 5th gen T4R budget big brake kit, CBI Off-Road Fab. custom Trailmaster 2.0 with swing-away tire carrier, CBI custom tube front bumper, CBI kickout sliders, CBI full flat belly skids including gas tank,CBI Ditch Light brackets w/ Heretic Studio Quattro's, Heretic Studio's 30" Amber on the front, Heretic Studio 40" bar under the Front Runner Roof Rack, Expedition Essentials RAM mount, Leer used shell, OEM black chrome sport headlights, fog lights always on mod, rear locker anytime mod, TRD supercharger, URD Ucon-EMS, Deatschwerks 255 fuel pump w/ URD external fuel filter kit, AFE intake paired to a Safari Snorkel, URD spec-U exhaust w/ factory Tundra muffler behind URD equal length headers.
    Very wrong!
     
    mr.trd, Oct 9, 2012
    #18361
  2. Oct 9, 2012 at 10:37 PM
    #18362
    Blackdawg

    #18362
    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    80,913
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.

    Looks fun!

    only a broke rear axle and rear bumper! haha
     
    Blackdawg, Oct 9, 2012
    #18362
  3. Oct 9, 2012 at 10:46 PM
    #18363
    Blackdawg

    #18363
    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    80,913
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    My thoughts exactly :cool:
     
    Blackdawg, Oct 9, 2012
    #18363
  4. Oct 9, 2012 at 11:10 PM
    #18364
    Pchop

    #18364
    Pchop Beavis Killer

    Joined:
    Sep 17, 2012
    Member:
    #87171
    Messages:
    15,850
    Gender:
    Male
    First Name:
    Rob I
    Stuart, FL
    Vehicle:
    '09 Tacoma TRD
    You would think the spotters would have kicked the logs out of the way to atleast attempt to avoid damage
     
    Pchop, Oct 9, 2012
    #18364
  5. Oct 9, 2012 at 11:27 PM
    #18365
    IDtrucks

    #18365
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,524
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    HAHAHAHA, sounds like a great plan! I see someone is going to wheel their truck into the ground!
    That was an interesting hummer haha! What size wheels were they?
     
    IDtrucks, Oct 9, 2012
    #18365
  6. Oct 9, 2012 at 11:34 PM
    #18366
    The Raisin

    #18366
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    It won't be the last time either. I am just looking for the breakage that forces me to go solid axle.
     
    The Raisin, Oct 9, 2012
    #18366
  7. Oct 9, 2012 at 11:36 PM
    #18367
    IDtrucks

    #18367
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,524
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    that would be cool:cool:
    Thats pretty impressive, how many more failures untill you go solid axle
     
    IDtrucks, Oct 9, 2012
    #18367
  8. Oct 9, 2012 at 11:36 PM
    #18368
    The Raisin

    #18368
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    I can only hope.:D
     
    The Raisin, Oct 9, 2012
    #18368
  9. Oct 9, 2012 at 11:36 PM
    #18369
    MapleMoose

    #18369
    MapleMoose Drunk Canadian

    Joined:
    Feb 15, 2011
    Member:
    #51211
    Messages:
    8,575
    Gender:
    Male
    First Name:
    Ian
    West Kootenays
    Vehicle:
    1996 Tacoma SR5
    3" Eibach Coils, 3" AP Springs, AP 6" Shackles Toytec Diff drop, BAMF Sliders, Deck plate mod,Volt meter, Highbeam mod, PIAA fogs, 18" Magnaflow, LED dash swap, Color matched Satoshi Grille, Custom Rear Plate Bumper
    Chainsaw would be very handy up there. Looks like a place you could get a stick through your sidewall too. Is it just a giant creek?
     
    MapleMoose, Oct 9, 2012
    #18369
  10. Oct 9, 2012 at 11:41 PM
    #18370
    The Raisin

    #18370
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    idk, I guess when it costs to much to cheaply fix. Like grenading the entire front end. I would like to start buying parts for the swap sometime soon. I see junkyard 60s front and rear in my future. Probably leave them full width too. Fenders and bedsides might go missing as well.
     
    The Raisin, Oct 9, 2012
    #18370
  11. Oct 9, 2012 at 11:43 PM
    #18371
    The Raisin

    #18371
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    Nope, what are you talking about? You want the KYBs when I swap for new shocks?
     
    The Raisin, Oct 9, 2012
    #18371
  12. Oct 9, 2012 at 11:45 PM
    #18372
    The Raisin

    #18372
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    Other than just to drive it, it has been a long time since that was a DD:)
     
    The Raisin, Oct 9, 2012
    #18372
  13. Oct 9, 2012 at 11:47 PM
    #18373
    MapleMoose

    #18373
    MapleMoose Drunk Canadian

    Joined:
    Feb 15, 2011
    Member:
    #51211
    Messages:
    8,575
    Gender:
    Male
    First Name:
    Ian
    West Kootenays
    Vehicle:
    1996 Tacoma SR5
    3" Eibach Coils, 3" AP Springs, AP 6" Shackles Toytec Diff drop, BAMF Sliders, Deck plate mod,Volt meter, Highbeam mod, PIAA fogs, 18" Magnaflow, LED dash swap, Color matched Satoshi Grille, Custom Rear Plate Bumper
    Where exactly is it? Closest town?
     
    MapleMoose, Oct 9, 2012
    #18373
  14. Oct 9, 2012 at 11:48 PM
    #18374
    The Raisin

    #18374
    The Raisin Well-Known Member

    Joined:
    Feb 2, 2011
    Member:
    #50452
    Messages:
    181
    Gender:
    Male
    First Name:
    Mark
    Spanaway, WA
    Vehicle:
    streetqueen
    Badlands front bumper with a Smittybilt 8K winch, synthetic winch line. Demello sliders and bedbar. Custom rear bumper. Custom skid plates. Flex-a-lite tranny cooler with fan mounted in bed. Bilstein 5100's with SAW coils, AllPro UCAs, NW offroad rear springs (garbage), 4.88s and front and rear lockrights. Lots of custom sheetmetal work.
    There's nothing to work out with me. Mike gave/ let me borrow them. If he said you can have them, there yours. I might make you come and get them though! hehe!
     
    The Raisin, Oct 9, 2012
    #18374
  15. Oct 9, 2012 at 11:48 PM
    #18375
    MapleMoose

    #18375
    MapleMoose Drunk Canadian

    Joined:
    Feb 15, 2011
    Member:
    #51211
    Messages:
    8,575
    Gender:
    Male
    First Name:
    Ian
    West Kootenays
    Vehicle:
    1996 Tacoma SR5
    3" Eibach Coils, 3" AP Springs, AP 6" Shackles Toytec Diff drop, BAMF Sliders, Deck plate mod,Volt meter, Highbeam mod, PIAA fogs, 18" Magnaflow, LED dash swap, Color matched Satoshi Grille, Custom Rear Plate Bumper
    MapleMoose, Oct 9, 2012
    #18375
  16. Oct 9, 2012 at 11:50 PM
    #18376
    MapleMoose

    #18376
    MapleMoose Drunk Canadian

    Joined:
    Feb 15, 2011
    Member:
    #51211
    Messages:
    8,575
    Gender:
    Male
    First Name:
    Ian
    West Kootenays
    Vehicle:
    1996 Tacoma SR5
    3" Eibach Coils, 3" AP Springs, AP 6" Shackles Toytec Diff drop, BAMF Sliders, Deck plate mod,Volt meter, Highbeam mod, PIAA fogs, 18" Magnaflow, LED dash swap, Color matched Satoshi Grille, Custom Rear Plate Bumper
    MapleMoose, Oct 9, 2012
    #18376
  17. Oct 10, 2012 at 12:10 AM
    #18377
    Twistedfreedom

    #18377
    Twistedfreedom welcome to the incredibuild

    Joined:
    Sep 12, 2011
    Member:
    #63386
    Messages:
    8,821
    Gender:
    Male
    First Name:
    Adam
    Seattle
    Vehicle:
    in progress
    modded the F*ck out
    Ian that is a killer deal on the Warn
     
    Twistedfreedom, Oct 10, 2012
    #18377
  18. Oct 10, 2012 at 12:17 AM
    #18378
    Twistedfreedom

    #18378
    Twistedfreedom welcome to the incredibuild

    Joined:
    Sep 12, 2011
    Member:
    #63386
    Messages:
    8,821
    Gender:
    Male
    First Name:
    Adam
    Seattle
    Vehicle:
    in progress
    modded the F*ck out
    I want to go! who want's to let me ride along? I have cash and recovery gear.
     
    Twistedfreedom, Oct 10, 2012
    #18378
  19. Oct 10, 2012 at 12:23 AM
    #18379
    Twistedfreedom

    #18379
    Twistedfreedom welcome to the incredibuild

    Joined:
    Sep 12, 2011
    Member:
    #63386
    Messages:
    8,821
    Gender:
    Male
    First Name:
    Adam
    Seattle
    Vehicle:
    in progress
    modded the F*ck out
    Um which ever one will get me the fuck out of spokane
     
    Twistedfreedom, Oct 10, 2012
    #18379
  20. Oct 10, 2012 at 12:35 AM
    #18380
    IDtrucks

    #18380
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,524
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    so is this planning another meet?
     
    IDtrucks, Oct 10, 2012
    #18380
Page 919 of 3002

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.39
ARB RD129 Air Locking Differential
$1,091.00
JDMCAR Compatible with Toyota Tacoma Accessories 2016-2023 Premium Cup Holder, Console, and Door Pocket Inserts Kit (Double Cab,Orange Trim)
$21.99
HVAC Fan Blower Motor Resistor Kit with Wire Harness Replaces 973-582, 87138-04052, 8713804052, RU746, RU1435 Compatible with Toyota - 2005-2020 Toyota Tacoma - Manual AC Control & Oval Connector Only
$17.98
Milestar Patagonia M/T Mud-Terrain Radial Tire - LT315/70R17 121Q
$358.07
Timbren TORTUN4 Suspension Enhancement System
$269.36
Denso 234-9001 Upstream Air Fuel Ratio Oxygen Sensor with 10.6” 4-Wire Harness, for Auto Trans Equipped Vehicles
$134.94
Denso 234-4189 Oxygen Sensor
$60.51
Raspberry Leaf Cut 2oz
$8.61
Super Swamper 35x10.50R15LT Tire, SSR Radial - SSR-40R
$607.99
SmittyBilt AIR COMPRESSOR 2.54CFM - SB2780
$116.98
Super Swamper 38x12.50-16.5LT Tire, TSL SX - SAM-98
$758.99
Odyssey 35-PC1400T Automotive and LTV Battery
$363.26
OPTIMA Batteries OPT8040-218 D35 YellowTop Dual Purpose Battery
$289.99
Koss Porta Pro Classic On-Ear Headphones, Retro Style, 3.5mm Wired Plug, Durable, Black/Silver
$39.99
BAOFENG UV-5R+ Plus Two Way Radio, Long Range for Adults Rechargeable with Earpiece, Walkie Talkie for Outdoors, 144-148 420-450MHz, Qualette Series, Black
$24.99
BAOFENG UV-5R 8Watt Ham Radio Handheld Long Range UHF/VHF Radio with 2 Rechargeable Battery, Portable Radio for Adults with Earpiece, GV-771 Antenna, BAOFENG Programming Cable (3rd Gen)
$39.99
ARB Toyota Tacoma Rear Air Locking Differential - RD129
$1,091.00
Pirate Jack Sparrow Flag 3x5 Jolly Roger Ship Banner Skull Crossbones
$8.39
Accu-Gage by Milton Dial Tire Pressure Gauge with Dual Foot Air Chuck and 11 in. Rubber Hose - ANSI Certified for Motorcycle/Car/Truck Tires (0-75 PSI)
$20.22
USA Made PL-259 Improved Double Shielded RG-58u for FireStik Antenna K-8A 18-Foot Single CB/Ham Coax Cable
$42.18
FireStik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
$12.24
Walker Quiet-Flow SS 55054 Direct Fit Exhaust Muffler Assembly 2.37" Inlet (OD) 2.37" Outlet (OD) for Toyota 4Runner
$208.98
Uniden PRO520XL Pro Series 40-Channel CB Radio. Compact Design. ANL Switch and PA/CB Switch. 7 Watts of Audio Output and Instant Emergency Channel 9. - Black
$65.73
Wynton Marsalis - Baroque Music for Trumpet
$9.93
Powertrax 1615-LR Lock-Right (Toyota Tacoma Rear)
$290.70
Japanese Kewpie Mayonnaise - 17.64 oz. (Pack of 3)
$24.99
ARB ARB605A Tire Pressure Monitor Inflator and Deflator with Analog Gauge and Flexible Hose in Blue
$48.00
FIRST ALERT AUTO5 Car Fire Extinguisher, FESA5, UL RATED 5-B:C, Red, 1-Pack
$21.44
NGK (4412) RC-TE66 Spark Plug Wire Set
$43.49
NGK (9578) RC-HE62 Spark Plug Wire Set
$41.48
ACCEL DFI 74812 Weatherproof Electrical 2 Pin Connector
$7.50
Superwinch 1510200 LP10000 Winch, 10000lbs/4536kg single line pull with roller fairlead, and 12' handheld remote
$580.54
WARN 26502 M8000 Series Electric 12V Winch with Steel Cable Wire Rope: 5/16" Diameter x 100' Length, 4 Ton (8000 lb) Pulling Capacity
$855.99
Bilstein Shock, B8 5125 Series, Monotube, 15.12 in Compressed / 24.35 in Extended, 46 mm, Steel, Zinc Plated, Each
$103.57
ViAir 90P - 00093 Portable Compressor Kit With Alligator Clamps, Tire Inflator, Tire Air Pump, 12V, 30 Min. @ 30 PSI, 120 PSI, For Up to 31" Tires
$100.56
Blue Sea Systems 5005 ANL Fuse Block with Insulating Cover, 35-300 Amp, 32V DC
$25.68
Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover
$40.99
HitLights LED Light Strip Connector, 8mm Single Color 3528-6" Any Angle Strip to Strip, 4 Pack
$5.99
Beard Beanie The Original Eco2 Black
$36.00
Wilson 305-4FD Silver Load Series 4 Foot CB Antenna Flex Whip
$27.50
Sigma 120-400mm f/4.5-5.6 AF APO DG OS HSM Telephoto Zoom Lens for Canon Digital SLR Cameras
$1,099.00
To Top