Short bed with truck box/chest

Does anyone have a short bed Tacoma with a truck box/chest? If so, post some pics.

A friend recommended going with ATV boxes since our beds are so narrow. I measured 42" and some change between the fenders in the bed, and about 18" up to the bed rails. I don't really want a box that goes over the rails. I just need to put a floor jack and a few other items in there. Post some pics!

Here are some lower priced ones I've been looking at...

DeeZee M207 (for ATV's) 35L x 12W x 12.5H


DeeZee

$340 DZ8537B Dee Zee 8537B Red Label Black 37" Utility Chest

DZ8537B (trucks) 37.12L x 19W x 16H


Deflecta-Shield 288271 (ATV's) 35.5L x 14.75W x 15H


UWS 42"

$615 TBC-42-W-BLK 42". Standard Chest Wedged with Beveled Insulated Lid - Black

TBC-42-W-BLK (trucks) 42L x 20W x 18H


And then there's a 36" UWS TBC-36-W-BLK that looks exactly like the above picture. 36L x 20W x 17.25H for about $80 less.

I don't know if I can justify spending more than $250 for a truck box for my Tacoma when my fullsize F150 box cost less than $200.

 

I just found this thread where someone posted good pics of the DeeZee D28537B. I wish I had replied there instead of starting a new thread. Oh well. This box looks pretty good.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/239854-black-tool-chest-bed.html

 

I just bought one from lowes. Once I get it and bolt it down ill post pics. Dimensions were 36" long, 20" wide, and 18" high.

 

Shown within this thread is the box that I have (bought at Tractor Supply), and its attachment method.

http://www.toyotanation.com/forum/61-2nd-generation-2005/287218-weekend-fun-5100s-pic-intensive.html

 

Yeah I'm just going to bolt mine to the bed.

 

I came up through the bottom with studs just to make it easy to take in and out.

 

Hello Forum,

I hope these help. These pics are so you can see how the box sits compared to the top of the bed walls:

 

Thanks for all the replies. I think I'm going to go with the Deflecta-Shield since it isn't as deep (14.75") and won't take up as much bed space. I still need to do a little research on the quality of it. I mainly wanted something to put a floor jack, some tools, jumper cables, and maybe a tarp in. I will get it as soon as the wife approves of my budget request.

 

Look like my tonneau cover would fit over top, anyone else has some picture of there truck box, maybe with a tonneau over it?