2013 Headlight Removal

Has anyone taken off a headlight on a 2013 that can help? This is the passenger side. I've searched and found a video for a 2012 but I'm not sure it's the same. I've removed the top bolts and the grill. There's a clip at the base on the right side of the headlight which I've unclipped. The headlight is loose but it feels like I'm missing a bolt next to then fender. I've tried to tug in hopes its a pop rivet or something but it won't come out. I dont want to break anything. Its too dark now so i put everything back together and will try again tomorrow. I now have 3 loose parking lights in there rattling around (dont ask). Any help is appreciated.

 

That's probably it. Do I have to remove the wheel well?

 

Does anyone know the size of the bolt off the top if their head?

 

10mm

 

http://www.tacomaworld.com/forum/lighting/213178-2012-headlight-grill-removal.html

works 12+

 

I did watch this but it's more a point and explain rather than how to. Also didn't hear about any bolt next to the fender.

 

its what I used to remove mine.. it wasnt too hard just a PITA to reach some of the bolts

 

I'll try and find the fender bolt tomorrow. Hopefully I can get to it from under the truck.

 

lay under your bumper and reach up towards the lights. there are 2? bolts before the light one so make sure you undo the right one

 

Yeah...

There are two in that area of the housing. If you feel up in there, it's on top of the one you will try to take off first.

 

Got it. Thanks for the help, that screw was a bitch. But taking the headlight out and putting back in was worse. Scratched the lense and the truck. Oh we'll, never again will I do that.