how do i turn off maint. reqd. light!??!

duz anyone know how to turn the maintenance required light off.
i took it in for an oil change and they didnt turn it off and its a paint to take it back in.

sooo n e suggestions? thx

 

http://www.tacomaworld.com/forum/2n...eneration-tacomas-reset-maint-reqd-light.html

 

To reset you Maintenance Required light:
1. Turn the ignition key to the "OFF" position with the odometer reading shown.

2. Turn the ignition key to the "ON" position while holding down the trip meter reset knob.

Hold down the knob for at least 5 second. The odometer indicates "000000" and the light goes off.

NOTE: You will see a series of dashes that count down while the system resets itself

If the system fails to reset, the light will continue to flash!

You must re-perform the procedure

 

it worked! thx haha

 

another thing for this, most common problems have already been talked about or had thread on them, do a little research, it goes a long way lol

 

Oh and welcome to TW. We gotcha covered.

^ for what you have just done has also been covered. We decided if that is the help you give just don't post. Not bitching just informing.