What Have You Done To Your 2nd Gen Tacoma Today?

Assuming Tundra's "Deck Rail Kit" would work?

http://www.toyotatrdparts.com/scripts/prodView.asp?idproduct=290553

 

today i took photos of my armorology front bumper build in progress.
jed will finish it next week.

i posted this build in an old armorology thread. i will update it again when i pick up my truck. i'm pretty stoked about this.
http://www.tacomaworld.com/forum/2nd-gen-tacomas/43506-armorology-bumpers.html#post7077608

 

I was thinking about trying them in a bed rack I was building but I ended up getting enough aircraft track to put in both of them. Thanks for the link though. I thought it was kinda odd when 3 dealerships had no listing for the tacoma bed rails.

 

With a new baby (6 weeks) in the house, I figured I could use a set of these to protect against cheerios and juice

Wet Okole Custom Rear Seat Covers
SKU 1932374
Part # AA170.00-Charcoal
Color Charcoal

 

Apachedriver, your Seat covers look great. If they don't do a GB soon, gonna have to go ahead and get some anyway.

 

Are the cleats going to hold that angle in? Might want to consider some 1/2" hardware

 

What was the price on that? Exact set I want, colors are great.

 

Got it detailed.... just in time for the rain.

 

Here's the part #s that you need.

Rail -

$56 PT278-35100-BH Truck Bed Header Rail

PT278-35100-BH
Caps - 66134-04010 (2ea)

 

Found some Skyjacker shocks on the front of a Jeep Wrangler with a mild lift at work last week. Looked fairly new, especially after a little cleaning up; stud mount at the top and through bolt at the bottom, so I figured it was worth a shot. Compared them to a stocker and they're about 2" longer, just what I needed no more stupid shock extenders!









The bottom through bolt mounts were a tad wide; nothing a hack saw couldn't fix fit like a glove when I got done with them. They feel a little softer than the stockers, so maybe it'll actually improve the ride a little with the light ass end of these trucks

 

That's all I have for now but was going to look in to finding a way to use te rail but have a bolt on the end of the t instead of the cleat going to look in to making them with flat bar or something unless someone has a better way...

 

Those are NICE!!!

 

I used a tonneau cover mount kit for a tacoma. Fit right into the rails and drilled a hole through the angle for the bolt.

 

Either of these should work with the rail, with a hole right through the angle with bolt and washer. You might be able to cut the round head off of a carriage bolt as well.

 

The 2nd is what I was picturing in my head where can I get them?

 

http://www.amazon.com/s?ie=UTF8&page=1&rh=n:16410141

mcmaster carr or grainger or fastenal probably have them as well. could get you a part number tomorrow from work

 

Nope you have done plenty will hit up fastenal in the morning thank you!

 

Not a problem!

 

Got these in the mail today

 

Installed this Magnaflow Cat-Back today