Plastic Bed Rail cap removal

Has anyone on here taken these long caps off. I was wanting to paint them with bed texture to make them more resistant to scrapes. I did not know if they just snap off or if there was some special way to come off. I see the two plastic pins on the inside but that is all I see. Thanks in advance.

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/5139-plastic-bed-rail-covers.html
http://www.tacomaworld.com/forum/2nd-gen-tacomas/5138-plastic-bed-rail-covers.html
In the similar threads

 

This is what it looks like underneath , there are pins that go down into those rectangular slots



There is a thread by XXXX on reinforcing the rail caps , there may be some better info in there , I'll see if I can find the thread

 

That was quick. Thanks guys. The search box does not work on my phone, so yeah.

 

Here's the thread I was talking about

http://www.tacomaworld.com/forum/2nd-gen-tacomas/270658-05-tacoma-bed-rail-reinforcement.html

 

Remove those two pins on the inside and pull it off. Just don't bend them too much pulling them off.