Bushwacker Fender Flares and Trimming for Larger Tires

I have some Bushwacker Pocket Style Fender Flares to install. Right now I have:

• 16" TRD Beadlock rims (PTR18-35090-BR)
• Tires BFG LT265/70R16

If I decide to install some larger tires later will I be able to trim under the fender flares to prevent any rubbing? Know there might not be enough specifics here such as tire size etc, but mainly want to know if it is possible to trim fender underneath these flares.

 

I have bushwacker fender flares and am running 33x12.5s on my rig now. I trimmed the inner portion of the flare when I trimmed my pinch weld and body. But I have a first gen, so I can't tell you for sure.

 

I have a 2nd Gen with Bushwacker Flares and 285/75/16s...zero rub...no trimming

 

Thank you very much and very good to know for the future especially since your lift equipment is very much like mine also.

 

It's an old thread but hopefully can get some info;

'12 TRD Sport Doublecab Long bed. 17X9 MT Classic III with 265/70 17 Nitto Terra Grappler G2

Tires rub the wheel wells when turning most of the time, kind of embarrassing actually. Took off the front mud flaps and now only rubs on really tight turns. Will The Bushwacker flares prevent rubbing without trimming? Would be great to just bolt them on and go.

Also, if anyone has pics of 2nd Gen Tacoma (especially Pyrite Mica)with the flares, it would be great

 

Here is a picture of pyrit mica with Bushwackers

 

subd...super glad i came across this thread