Correct Match on Wheels

I just ordered XD122 Enduro Wheels in Black. They have the following spec's:
16x8, 6 on 5.5 Bolt Pattern
BackSpace = 4.50 in.
Max Load = 2200 lbs.
Finish = Matte Black
HubCentric = No
Offset 0

Alan and 4wheelparts.com was not sure if these wheels would hit the calipers or not. Does anyone know? I'll get them in 10 days but if they are wrong I can still change the order.

Also, I'm getting a pro-comp leveling kit which will lift the front 2.25". Alan has said that I can run up to 33 tires on the truck. That would mean a 285-75-16 shouldn't be a problem. Any input.

Truck is a '09 Tacoma Reg cab 4x4

I realize these questions get asked all the time and I've read a ton of posts. It seems they are all different by a slight amount.

 

Similar specs to mine. I don't have any issues with them.

You would have to do some trimming to fit those 285's

 

Shouldn't have a problem, but will have to trim for the tires.

 

Thanks for the info. I'm going with 265-75-16's
All my mod's are going to be in this week and I'll post some pictures when I get them installed. Thanks again.

 

Dude, where are the pics. I like these wheels and would like to see it.

 

I'll take some and post the. They did turn out kick ass!!!