Question on suspension build

I have a 07 Prerunner offroad and I have enough money to get a lift. Will getting the Maxtrac spindles with 5100s in the front work with AAL and another set of 5100s in the back? My question is do I need to get new wheels and tires rights away or can I wait on that for awhile and will these items get my truck the equivalent of a 6 inch lift kit.

 

if you do maxtracs and billies with OME 885 springs then yes you can get 6 inches in the front and for the rear youll probably be better off with all pro expo leafs and maybe 1.5 or 2 inch block with it to get the rear end to match the front. I dont believe you can use the 5100s for the rear though you may have to get the 5150s but im not sure. As for the wheels and tires you can wait as long as you want if you have enough back spacing on the rims to clear the maxtrac spindles.

 

Ask these guys. They know all about the maxtrac lifts.
http://www.tacomaworld.com/forum/suspension/203889-maxtrac-spindle-lift-2nd-gen-prerunners.html

 

I thought that the Leafs and Billys would raise it 4 inches in the back theoretically being level with the spindles plus billy in the front

 

How big is the AAL? the rear billies dont adjust like the fronts do. Its a completely different set up. The rear is just a shock with a specified amount of "travel" and you need to make sure youll have enough travel for a 5-6 inch rear lift. Youll probably want a 12 inch travel shock.