1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

'11 Fj Coilovers and shocks on an '04 4Runner

Discussion in '4Runners' started by Jez, Jan 2, 2012.

  1. Jan 2, 2012 at 4:54 PM

    Jez [OP] Hittn' easy steet on mud tires

    Jul 15, 2009
    06 Black DC TRD SR5
    K&N air intake, Fox 2.5 coilovers, Total Chaos UCA's, AllPro Expo rear leaf pack, Fox 2.0 rear shocks, Diff Drop, U-Bolt Flip kit, Drive Shaft shim kit, Weathertech's, Borla cat back, Ultra Gauge,Clarion Radio, 18% tinted windows all the way around, smoked tail lights and rear break light, painted front chrome grill black, stained yellow fog lights, black head light mod, Interior LED kit, LED reverse lights, black leather arm rest mod
    My 2004 V6 4x2 4Runner suspension seemed shot after 100k miles. A few weeks ago I purchased a set of coilovers and shocks off of an 2011 Fj from The Parts Whore. After some research we determined that they "should" be an exact crossover fit however I was not able to find a definite answer anywhere. This write up is for anyone looking to do this switch in the future.

    Yesterday I spent roughly 4 hours installing the new set up on the 4Runner and only had two minor hiccups. The first issue was getting the front coils into the bracket on the lower control arm. The width of the receiving cylinder on lower mount of the shock was about 1/8" wider than the receiving flange on the LCA. I took a grinder to it and eventually it fit. The second issue was getting the old rear shocks off as I did not have a lift. I chose to use a sawzall to cut the shock out. The Fj shocks were an exact fit. Outside of that all the bolt patterns and sizes lined up perfectly.

    In summary: The coilovers are 1/2" taller and quite a bit beefier from stock. The rear shocks are about 1-1/2 times bigger than stock. The larger set up provided a 1/2" of lift and eliminated the rub of the BFG 265/70/17's. Although the lift wasn't intentional I will take it : ) After test driving the rig I was able to tell that the ride was somewhat stiffer but an excellent improvement overall. Due to the height difference I will be getting a front end alignment immediately.

Products Discussed in

To Top