17" x 9" Wide 0 Offset

My apologies in advance about the possibility of posting this in the wrong section (wheels versus 3rd gen secrion). I've used the search thread, nothing came back 3rd gen specific.

Looking to get 17x9" 0 et (offset) wheels. Not concerned with the "poking", plan on getting larger fenders- a 1" poke never hurt anyone apart from the wallet with a slight decrease in MPG due to aero but that's another story....

I would measure and confirm clearances myself BUT I haven't taken delivery yet of my OR Taco and a set just popped up online locally.

If you guys wouldn't mind sharing your .02 in regards to inner clearances? Would like to avoid control arms and fender wells
Plan on doing an OME lift and wrapping the said wheels 17x9s on either 285/70 or 265/70

 

Those will "poke" 2"...
The inside will sit .4mm closer to the suspension.

Offroad wheels are 16x7 +25mm offset
Here's a calculator.

 

I run 17x8.5 with -6 offset ... tires just "poke" out about 1/2" don't care about aero.. not to much bro but just enough...

 

18x9.5 et6. W/ 33's.

Sometimes rubs cab mount.