1st Gen Lunchtable Thread - General Discussion

You shouldn't allow yourself to like things that are bold and bright

 

Why buy traffic cones when you can be a traffic cone?

 

Kinky

 

Fun Fact: The reason why the logo for the VLC Media Player is a traffic cone is because the creator of VLC had a traffic cone collection.

 

Oh man...

 

My current suspension is only 9 months old ,

My tires are about 7 months old. Plenty of life left on my tires but I'll go up to 255 /85/16 once I replace them.

 

Just add more air so they stretch and get taller

 

What all are you running?

 

Ahh ok.

What front and rear you plan on going with?

I'm surprised I sit level with all the weight on my truck; I do have a slight rake though with the bed rack and RTT off though.

 

Lemme know what you decide, definitely don’t hold them for me or anything

 

I did my entire suspension immediately.

I've got Fox 2.5 up front, regular travel, and they come with Eibach 600lb springs.

I started with Fox 2.0 in the rear, and installed Dakars with Wheelers Super Bumps.

I didn't ride on the stock suspension for more than 3 months after getting the truck.

I questioned the valving of the rear and purchased Bilstein 5100s and ran those instead when I had no weight in the truck.

Fast forward 9 months later, I bought King 2.5 just because I should've gone EXT travel to begin with.

Contemplating keeping the Fox and replacing the bushing for extended travel or just sell them as is. They don't even need a rebuild...

 

Yeah, from the bad roads to my house to the many fire roads and trails not far from me, plenty of opportunity to take the road less traveled when getting to the mall

 

https://www.instagram.com/p/B9KIetzH52c/?igshid=26sfnhwut4j0

 

Someone did a dirty and replaced the spindle nut on this truck. 35mm socket for one side and 36mm on the other... Guess who needs to go to the parts store

 

Also, found out I need to take apart the front diff to do the pass seal

 

Not even if it was 5spd at that price.
But it will sell.

 

I'm back
GQs coming soon
Asseating fish for @Wulf

 

Is this you or someone else? I thought my 5100s were a bit stiff until I replaced ball joints and tie rod ends.

Then it started driving and handling like a new truck.