1st Gen Lunchtable Thread - General Discussion

There's no better way to tell the world you skipped out on your pregnant girlfriend and have multiple warrants

 

Hooked up the gamin pc for the first time in a year and a half. No video output

 

You don't need a monitor.

Just go by sound; download and install COD MW

 

I can't drink jager so no way I can drink that

 

Virtual ram

 

Drive by braille

 

Is that how blind gangsters do it

 

Use to call it that when people would drive over the lane markers

 

Gonna go look at this tomorrow.

 

1 Natty Light
3-4 dashes of salt
.75oz of triple sec

Follow me for more recipes

 

I figured out why the bellhousing and engine on my lexus didn't want to line up, there was a wiring harness bracket shoved between them on the verrrry top of the bellhousing

Not looking forward to dropping the trans... again

 

Que ano es?

 

2010, last year of the twin turbo n54 engine

 

They're great dailys, my dad's is an 09, you're going to want to change out the vanoss valves and service the transmission

It drove like a different car after changing out the sealing sleeves for the valve body/mechatronics unit, trans pan/filter, and new zf fluid

It has 200k miles and still drives like a $70k car

 

Doesn't your dad have a NA model?

 

*Cual año

 

Yes it's na, but an aged vanoss system will still mess with throttle response and it still has a zf transmission

Ps if you ever remove the knuckle don't hammer on the hub, one of the bearings started growling after my dad did that while replacing a control arm

 

I'll check the vanoss to make sure it's commanded and actual values match. It would be hard to tell on one of these if it was acting up, the turbos spool instantaneously.

On the second one, yeah I already know that's a terrible idea, especially on an aluminum knuckle, you run the chance of killing the bearing like you did or deforming the bearing race in the knuckle.

 

PO called this truck darth. it's starting to seem fitting.