1st Gen Lunchtable Thread - General Discussion

He said with spacers he rub worse on other parts.
Only rubs at full lock

 

You guys got set up! He typed this from Tyler’s

 

He's full of shit, with spacers he'd be at stock 1st gen wheel specs and his tires are barely bigger than stock, even the scanning electron microscope couldn't tell the difference. I had KO2s and stock BS wheels

 

What!?

I can guarantee you it rubbed worse with spacers. Without spacers, I only rub on the upper control arm and a little bit of the frame.

At 1.25, it rubbed the mud flaps. At 1.75, it rubbed the frame. Badly.

 

By no means am I trying to funny about it. I'd totally be bummed, you have a great attitude about it. Plenty of people out there better than normal with prosthetics. But do you get to keep the titanium in your leg? That would be cool, I know I would like to keep it if possible if it were me.

Hope you have a speedy recovery when the time comes.

 

Your wheels are set too far in, they should be out one 1" to be stock. I ran that setup with those tires and had zero rubbing on frame or mudflaps and especially not the uca (which should never be allowed to happen). You have a lot more adjustment now than I ever have too so if for some reason they built your frame crooked enough that you're that messed up you can correct it. I have 3.75" BS with much larger tires now and don't rub.

 

Gonna need a big Mason jar for that

 

I am present.

 

It will be a foot. Even those are high tech. The ultimate https://www.ottobock.co.uk/prosthet...rosthetic-product-systems/triton-smart-ankle/
The basic http://www.freedom-innovations.com/feet/

 

Possibly but it's definitely the wheels. 2nd gen & 3rd gen stock wheels have way more backspacing. 1st gen stocks are 4.5". 2nd gen is 5.5" IIRC. How much do 3rd gen wheels have?

 

No need to praise my toyota.
We all can worship it in our own way.

 

yet you responded.

 

Holster your dick beaters keyboard samurai

 

"holstered".

 

Good cause the electron microscope is still inpecting Bartos lift

 

Ya i'm getting hardware back after they run it thru an autoclave. I'm going to make a desk display out of it.

 

Truck shifter?

 

3rd gen wheel specs are the same as 2nd gen

 

World's strongest and most expensive shifter.

 

I need those gold brushed SCS f8's!!
or F5's.