2002 Tacoma Viper5901 REFERENCE INSTALL GUIDE

Quick Reference Install Guide
Main Harness (H1) 12pin Connector
H2>Red +12vconstant> To empty space on fuse box
H3>Brown (+) To Red Siren wire
H5>Black (-)Chassis Ground To driver side kick panel
H8>Green (-) Door trigger Input To (H1/9)Black/white(-)Dome light To Black/white A Pillar
H11> White Parking Light Output To Green(+) kick panel harness.(Notelug 10amp
fuse inside Module box (+) Polarity

H2 Harness, 18pin Connector
H2/8> Brown/black Horn output To Green/Red Steering Columm
H2/15> Grey (-) Hood Pin Input
H2/17> Brown (+) Brake shutdown Input To green/white Brake Pedal Switch
H2/18> Black/white(-) Neutral Safety Input To Chassis Ground driver side kick panel

Door Lock,3 Pin Connector
1>Blue (-)Unlock Output To Violet from front of fuse box harness
2>Green (-)Lock Output To Gray from front of fuse box harness

Remote Start, (H3)10 Pin Connector
H3/1>Pink(+)Ignition 1 To Black/yellow Steering columm connector
H3/2>Red/White flex relay input To White(+)12v constant Steering columm
H3/3>Orange (+) ACC Output To Blue/Red Steering columm
H3/4>Violet (+) Car side(starter kill) To Black Steering columm(Cut Black Wire and solder to Violet wire)
H3/5>Green (+) starter switch side(starter Kill) To Black steering columm(Solder Green
wire to Black other end.
H3/6>Red Ignition 1 Input To White(+)12v constant Steering columm
H3/7>Pink/White Flex relay Output To Black/Red steering coluum
H3/8>Pink/Black To N/A (not connected)
H3/9>Red/Black ACC/Starter Input To White(+)12v constant Steering columm
Note: Solder all Connections, Wires not listed because not connected.