2015 backup camera compatibility

http://www.crutchfield.com/p_249RCTY71T/Crux-RVCTY-71T-Backup-Camera-System.html

Has anyone with a 2015 installed this successfully?

 

I would also like to hear. I looked at the instruction sheet and it looks like it doesn't bolt in like the OEM module. It would appear you need to drill a hole for it in the tailgate handle. That seems to be doable, but I would want to make certain the connector plugs right into the harness on the truck.
I is certainly the most affordable option. Dealer price is nuts.

 

I can't help you out TOO much, but I can say that looks just like that camera on my '15, so it can't be too bad.

 

Thanks. They say it will go in 14 but not a 15. Idk if the connectors changed but that's what I'm gathering.

 

If you want, I can take a closer look at it tomorrow.

 

If I could get a definitive answer I'd appreciate it. I'm getting a topper in a week or so and think it would be beneficial to have one. Probably the only thing I didn't like about my 15, other than 2 speed wipers, but I can live with that.

 

Tomorrow after work (if it's not raining) I'll take some pics of the wiring for mine and send them your way, and hopefully that'll help.

 

http://www.mnrelectronics.com/2014-...a-with-pre-wired-tailgate-connector-250-8412/

http://www.rostra.com/2014-toyota-tacoma-tailgate-backup-camera.php

Also, I just found this too, which seems like an easier and cheaper option. Is your truck prewired for a camera?

 

So after checking those sights and searching further, I've determined my tacoma is prewired. Also the 14 & 15 uses a 6 lead connection vs earlier 4 lead connections. Strange thing is all photos for all sights show a 4 lead, so I may have to gamble with crutchfield, just because I know return would be easier.

There is a seller on eBay that posts on here that was selling OEM, but it sounds like he sold out and won't get anymore.

 

I will be interested to hear how it goes.

 

So after further investigation I found the connector in front of the bumper is a 4 lead and that's where the aftermarket camera would connect. That's why all the aftermarket cameras have 4 lead connectors and their included wire will run through the tailgate. The 4 or 6 lead would only matter with oem cameras. So I think I'm ordering the crutchfield. I'll post the results.

 

Sounds like you've got it figured out. I hope it all works out for you. Worst case, you just return it.

 

Thanks again. And you're correct, all I have loose is time.

 

I just purchased a camera from him, he revived some new stock. It works well, but is a tad grainy. I can't say if it is OEM but it fit the hole perfectly. Install was plug and play. I also purchased gentex mirror from ebay. Advertised for Tundra but fit perfectly. Less then 450 for both and 10 min install if truck is prewired ( I believe 09 on is all prewired). Hardest part was pulling the plug from the headliner.....that was some amazing tape.