1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3rd gen SR5 w/ DRL relay added - Adding OEM LED Headlights

Discussion in '3rd Gen. Tacomas (2016-2023)' started by YotaC, May 30, 2023.

  1. May 30, 2023 at 8:39 AM
    #1
    YotaC

    YotaC [OP] Member

    Joined:
    Jan 25, 2023
    Member:
    #416340
    Messages:
    18
    On my SR5 I added the DRL relay that is used for the factory LED DRLs. This relay was wired in to my ecu so that it triggers the relay when the DRL on the steering wheel stalk is turned on. I followed the schematics here for this add: https://www.tacomaworld.com/threads...sr-sr5s-without-drl-led-in-headlights.682995/

    I am doing some planning to add the OEM LED headlights and I want to have my wiring planned out. Since I have a 12V wire that is being switched from my stalk now, can I use this same 12v source for the new LED headlights?

    And if so, what connectors might I need to make this happen? I have seen the wiring harnesses that are sold for the SR5 but I am hoping with my setup I can use my 12V DRL circuit instead of the resistor needed to separate the Halogen DRL and the turn signals.
     

Products Discussed in

To Top