1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

4x4 conversion???

Discussion in '1st Gen. Tacomas (1995-2004)' started by TopFlightTaco, Feb 28, 2008.

  1. Feb 28, 2008 at 8:47 PM
    #1
    TopFlightTaco

    TopFlightTaco [OP] tacoma= one bad mamma jamma

    Joined:
    Jan 29, 2008
    Member:
    #4488
    Messages:
    21
    tampa
    Vehicle:
    02 PreRunner SR5 TRD
    6" fabtech lift, 31/1050/15 BFG all terrains, bull bar, westin side step bar.
    hey guyz. i hope i dont start another feud like i did in the exhaust thread that i started (which btw was a tremendous help. i went with the flow 40 bc a friend had a new one for free, and i bought the magnaflow)

    my questions are: 1) what does it cost (approx) to do a conversion on a 02 dbl cab auto and?
    2)what all is needed?
    3) or is it better to just buy one already 4wd? (remember i already did the 6" lift and exhaust. the rest is interchangeable.)

    as yall can tell i caught the itch to do as much as possible to the truck. i want an offroad machine!!!!!!!!!!!!!!!!!!!!!! :D
     
  2. Feb 28, 2008 at 9:06 PM
    #2
    humanoid

    humanoid bite me

    Joined:
    Jun 27, 2007
    Member:
    #1932
    Messages:
    2,727
    Gender:
    Male
    Sunny SoCal
    Vehicle:
    I had a '99 Xtra Cab PreRunner SR5 V6
    You asked for it:
     
  3. Feb 28, 2008 at 9:19 PM
    #3
    TopFlightTaco

    TopFlightTaco [OP] tacoma= one bad mamma jamma

    Joined:
    Jan 29, 2008
    Member:
    #4488
    Messages:
    21
    tampa
    Vehicle:
    02 PreRunner SR5 TRD
    6" fabtech lift, 31/1050/15 BFG all terrains, bull bar, westin side step bar.
    thanx man. doesnt SEEM to bad. but then again neither did the 6" lift (i had trouble pressing in the bearings). do you know where i can get the stuff to do the swap?
     
  4. Feb 28, 2008 at 9:31 PM
    #4
    humanoid

    humanoid bite me

    Joined:
    Jun 27, 2007
    Member:
    #1932
    Messages:
    2,727
    Gender:
    Male
    Sunny SoCal
    Vehicle:
    I had a '99 Xtra Cab PreRunner SR5 V6
    Check on various discussion boards, craigslist, junkyards etc. Try car-part.com too.
     
  5. Feb 28, 2008 at 9:42 PM
    #5
    alextreme76

    alextreme76 Well-Known Member

    Joined:
    Feb 20, 2008
    Member:
    #4843
    Messages:
    50
    Gender:
    Male
    Tucson, AZ
    Vehicle:
    05 Reg Cab 4x4 5spd 265/70/16 Rugged Fails
    sounds like a weekend project :rolleyes:
     

Products Discussed in

To Top