1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

5100 help

Discussion in 'Suspension' started by Failed_1, Jan 23, 2017.

  1. Jan 23, 2017 at 10:17 AM
    #1
    Failed_1

    Failed_1 [OP] Well-Known Member

    Joined:
    Dec 14, 2016
    Member:
    #204844
    Messages:
    59
    Gender:
    Male
    Vehicle:
    2017 TRD Off-Road 4x4
    Okay, I'm sure this has been beaten to death but I just want to make sure.

    First. The 1st gen 5100s will work on a 3rd gen Tacoma right (front and rear)? I found a set locally, that were used for 5K miles, they are coming off of an FJ. According to the Bilstein site these will fit 05+ Tacomas as well. Is this correct?

    Second. Can I use these with my stock TRD OR 4x4 coils? Will I achieve the 2.5 inches of lift with the stock coil? My goal is to run a 285/75/16, I know some cutting will be needed, but just wanted to make sure these will do the part. Also, what size block in the rear to achieve a level look?

    Figured I'd ask these questions again. Also if anyone has any pics of 1st gen 5100s on stock coils on a 3rd Gen, that would be great! TIA
     

Products Discussed in

To Top