$75 - Camburg UCA's (OEM Ball Joints)

I'm selling my Camburg UCA's that I had installed on my 2006 DC Tacoma and I'm asking $75. These UCA's use the OEM ball joints, so please do your research before buying because i have read that these UCA's only except OEM ball joints. Also, please note these UCA's will be sold with my OEM ball joints still installed in them. I would recommend you replace both ball joints before installing on your truck. You will notice these UCA's have white plastic caps pressed into them. I had a machine shop make some custom caps that press into the tops of the UCA's. When you go to remove the old balljoints, the white caps will come out with the ball joints, so you will be able to choose to reinstall or discard. Please do your research on the amount of lift you are planning to use on your Tacoma and if these UCA's will work with your truck, because all sales will be final. I believe these UCA's are best used with a 2.5" lift in the front.

I live in Greenville, SC and I would prefer to sell local. However, I do have these UCA's boxed up and I will find out what it would cost to ship if you are serious about purchasing. Let me know if you have any questions

 

Dibs. Do you have a part number for them?

 

For some reason I can not edit this post, but the pic of spacers will not be included with this sale.

 

presta24- ok man that was fast. In box me your address info and I will have to get back to you next week on how much it will cost to ship these. Shipping cost we be added to the $75 asking price.

 

You have a part number for them? I'd like to review specs.

 

Next with PayPal in hand.

 

Unfortunately I don't. I've included a pic below of the email confirmation I got from Wheelers off-road when I purchased them back in 2011. You are welcome to call them and get more details if you would like. I do not think they still sale this specific model.

 

3rds!

 

Just so everyone knows, I will give the first poster 24hours to respind and then move on to the next buyer. Thanks

 

Also in line

 

PM sent OP

 

Still available?

 

Just for full disclosure, I believe I've read on here that the new model that has the Moog ball joint installed is a little different then this model. I think Camburg took the same UCA that i have for sale and bored out the ball joint cup a very small amount to accept the Moog ball joint. We're are talking about small variances between the two models, but I want to make sure everyone had done their research.

 

This is what I read on them seems they will accept OEM style ball joints

https://www.tacomaworld.com/threads...-joint-ucas-cam-310039-and-cam-310080.368684/

 

I may have been using the wrong wording in my prior emails. When I say OEM, I mean I re-used the stock balljoints that came with my 06 Tacoma. The stock balljoints pressed in with no issues. However, I have read where Moog balljoints did cause issues.... some people were able to press Moog balljoints into this UCA with no problems and others had issues.

My original plan was to have a shop slightly bore out (hundredths of an inch) the cups to install new Moog balljoints, but I ended up going with a different brand. Also the new UCA's cost me $500+, so if you can make these work your getting a good deal.

 

Next in line

 

I'll give you $120+ shipping to 35016 if i can be 1st in line

 

I'll do $130

 

interested. pm'd

 

$150