1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

96 Tacoma transmission/transfer case/differential questions

Discussion in '1st Gen. Tacomas (1995-2004)' started by blt2tuk, Jan 11, 2012.

  1. Jan 11, 2012 at 3:59 PM

    blt2tuk [OP] Well-Known Member

    Dec 4, 2011
    Franklin, North Carolina
    1996 Toyota Tacoma
    I think this is my first post on here. But I recently. Bought a 96 ext cab Tacoma that has a 3.4 engine 5 speed Trans and it's 4wd. The motor was blowed, and the front diff was busted in this one when I bought it. So I bought a late 1995 reg cab 3.4 5 speed 4wd Tacoma for parts. My question is would the front and rear differentials in both trucks be the same or would they be different ratios because of the reg cab ex cab difference. Any help is greatly appreciated. Thanks guys
  2. Jan 11, 2012 at 5:03 PM

    Blackdawg Dr. Frankenstein

    Dec 31, 2010
    First Name:
    Wyoming/St. Louis
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Should be the same as they are both 3.4l and a 5 spd.

Products Discussed in

To Top