Advice on installing a 6-CD stock Toyota radio

I have a 05 Taco with a single CD stock radio that I want to swap out with a 6-CD stock radio. Can anyone advise on if there is an aftermarket harness adapter available to do the hookup or if it is a splice job only.

Thanks in advance.

 

if its not a jbl 6 changer its just a quick plug and play swap no spicing or anything, I did the same thing you are doing 10 mins and its done

 

Thanx Greg...I think that it is the jbl unit. My single CD unit has 4 separate plugs but the 6-CD unit only has 3. While two of the plugs from the harness fit both units (left side when looking at the back of the deck) the ones on the right are different. The 6-CD unit 3rd plug has many more pins than the single CD unit's two plugs. Any further thoughts would be welcome...

 

sorry I was not much help good luck with the install and Im sure someone who knows more will chime in soon

 

Update...

The 6-cd HU that I want to replace my single-cd HU with is as follows - JBL unit, model #86120-04120, ref #CQ-ET1460X, mfg in March 2008.

The HU will, I hope, be going into a 05 Taco with the single-cd HU...

Thanx again all