1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Air/Fuel Gauge install

Discussion in '1st Gen. Tacomas (1995-2004)' started by rcsec, Jun 5, 2008.

  1. Jun 5, 2008 at 8:45 AM
    #1
    rcsec

    rcsec [OP] Member

    Joined:
    Jun 5, 2008
    Member:
    #7125
    Messages:
    8
    Has anyone installed an Air/Fuel Gauge in their Tacoma? I have an '02 DoubleCab with a 2.7. Some of the aftermarket gauges work with the Oxygen sensors and some require an accessory kit (narrowband sensor kit). Will I need the accessory kit and is there the fitting/well to install the sensor on a pretty-much stock truck?
    TIA,
    Ray
     
  2. Jun 6, 2008 at 7:46 AM
    #2
    rcsec

    rcsec [OP] Member

    Joined:
    Jun 5, 2008
    Member:
    #7125
    Messages:
    8
    I contacted the fine folks at Auto Meter and they answered all my questions; is an accessory kit need for an 02 Tacoma, how to hook up gauge, and mounting the gauge.
    They quickly listed the color of wire and location of the sensor leads to wire-in the gauge.
    There wasn't a picture of the gauge pod on their Web site, so they ran down to the warehouse and took a picture of it!
    Talk about customer service and a knowledgeable staff! Thanks guys...
     

Products Discussed in

To Top