1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Option for adding temp Easy oil change. Short Antenna Fumoto Valve/Oil Change Drain Plug Wheel well liner Bed Mat Question (Short Bed)

Airbag light stays on

Discussion in '2nd Gen. Tacomas (2005-2015)' started by swm1544, Jan 3, 2010.

  1. Jan 3, 2010 at 5:58 PM
    #1
    swm1544

    #1
    swm1544 [OP] New Member

    Joined:
    Jan 3, 2010
    Member:
    #28700
    Messages:
    1
    Gender:
    Male
    First Name:
    scott
    san diego
    Vehicle:
    trd off road
    I have an 06 trd off road that had its interior vandalized. One of the things I had to replace was the instrument cluster with one from a junk yard. The airbag light stays on all of the time. I had a friend scan the computer and clear several codes but code b1816 remained. basically it is saying there is a short in the front or left side wiring or possibly a bad connection at the cluster pin connectors. I checked all of the wiring i could for anything obvious but found nothing.I then plugged in the old cluster and the airbag light did not come on. Plugged in the new cluster and the light on that one was on. Seeing as the new cluster was out of a wreck, I am wondering if there is something in the new cluster that needs to be reset? maybe an autobody tech would be familiar with this?
     
    swm1544, Jan 3, 2010
    #1
To Top