Sold: AllPro +2 Long Travel (needs work $700)

AllPro +2 Long travel kit. i purchased it used. I replaced all the bushing and UCA uniballs as well as lower shock eyelets. The kit had rusted lower shock bolts which i had to cut out this led to minor damage on the lower shock and lca (which i personally dont believe it would cause any failure).

one lca is bent slightly as can be seen. this was causing issues for me and i have no desire to fix this kit. Axles are not included since i sold them separately.

Shocks are have surface rust but could be rebuilt/cleaned up.

if someone has a way to fix this then this is a steal. kit pulled 12" of travel measured at the wheel hub.

$700 plus shipping (it is heavy and currently is in a 27gal HDX container from homedepot). otherwise itll sit till i trash it or figure something else out to do with it.

Passenger Side:







Driver Side:







you can see here the bent portion on the driver side lower LCA

 

Dang


So tempted

 

That bent arm looks like a pretty easy fix as well

 

possible something you could fix at all?

 

if it’s just what’s pictured I could most likely fix it

 

Bump price drop to $500+shipping

 

This includes the coil overs?

 

Yup

 

Damn I wish shipping wouldn't be so much. GLWS!

 

probably around $150. still pretty solid imo

 

I was thinking shipping would be over 250. That changes things. Let me check and see if I can actually fix that arm and I will get back to you.

 

that was a quick quote off ups using a 75lb box with the HDX 27gal dimensions but ill recheck it again with a zip

 

What sort of issues was that causing you?

 

Probably alignment issues.

This seems tempting but given the amount of straightening work and rust clean up these would need to endure at both the arms and the coilovers side I don't know if it's worth it for me.

Either way, GLWS @Sacrifice ! I'll let you know if I want it.

 

If that other guy doesn't buy it I probably will. I can get them sandblasted and powder-coated at the shop, and would just replace the CO with some kings. I think this would be a great way to get into the LT game on the "cheap", with a bit of work.

 

alignment. needed stiffer springs which i did buy (700lb) and ill include for extra

 

Could you be more specific if you don't mind? Like was it causing unnecessary camber and causing tire wear or something else? I'm just trying to see if it's as simple as bending it back down or if there's something else at play here. Or we can take this to PM if you like.

 

camber. honestly didnt fuck with it enough. it wouldnt align and i decided i was done messing with it. as far as i can see the bend in the lower arm uniball as i pictured is the only issue.

 

for anyone else interested in estimating shipping cost:

my zip is 66202, basing 75lb box, $1000 insurance, additional shipping & handling due to size and using HDX 27gallon dimensions.

 

bump. I heard this sold