1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Anyone install a Kenwood CCD2000 Camera

Discussion in 'Audio & Video' started by jmasterj, Apr 13, 2009.

  1. Apr 13, 2009 at 1:34 PM
    #1
    jmasterj

    jmasterj [OP] Samsonite...I was way off!

    Joined:
    Sep 17, 2008
    Member:
    #9301
    Messages:
    141
    Gender:
    Male
    Vehicle:
    07 TRD Off Road
    I have installed my dnx5120 no problems and am looking at installing my CCD-2000 camera and am a little afraid of doing it, but really don't want to pay to have it done. If you have one how did you running the cabling and put the little relay box etc?
     
  2. Apr 13, 2009 at 10:59 PM
    #2
    all.on.black

    all.on.black Well-Known Member

    Joined:
    Jan 2, 2008
    Member:
    #4066
    Messages:
    1,481
    Gender:
    Male
    Auburn, WA
    Vehicle:
    06 Double Cab Sport with a few mods
    If you're running it from the rear bumper just attach the camera cable to the taillight harness (with zip ties) all the way to the inside of the truck. The harness comes out underneath the carpet on the drivers floor. The cable is long enough (once the other half is connected) to make it to the dash. The relay box you can put anywhere. The reverse wire is in the driver's kick panel and the ground and acc wires you can tap into at the radio harness. I'm in the process of installing my back up camera right now but the rain is slowing me down.
     
To Top