Anyone install Detroit Truetrac

Very interested to hear what you find out. Don't want to go ARB in the front if I can avoid all the extra moving parts and pieces therein, not to mention the cost.

 

Bump
Eaton'a vehicle application guide only offers the TrueTrac for 1995-2005 4cyl Tacoma models. What part number is everyone using for their later 2nd gens. (2010-2015)

 

I've looked and not found one. I've run these front and rear in other Toyota trucks.

 

Such a bummer. I see other people with 08-11 talking about it in their truck. I'm wondering what part number they used. This is irritating.

 

? I did it in my Toyota pickup, pre-2nd gen. I've not seen a Trutrac for front diff on 2nd gen. I'd buy one if there was.

 

after lots of complaining and looking and seeing it in person. they dont have and arent doing one for the 2nd gen 8 inch. the 8 inch that was listed was the pre 85 solid axle 8 inch. not the clamshell.
were you asking for the front or rear of the truck there @tpotnoc
I have one in the rear and love it. standard gear oil is required but way more positive hookup then the factory unit. and I have had full lock under brake pressure suspended in mid air.

 

using Justdifferentials and other sites the number for the rear is the same as the t100 and first gen tacoma 8.4 listing above with the following
http://www.justdifferentials.com/TT913A541-p/tt913a541.htm
the 913a541
here is a link of me playing in the snow with the traction control off... both rear wheels going crazy lol...

https://youtu.be/Oa9yLJcJ7Y0

 

I'm looking for my rear 8.4" for my 2015 4cyl.

 

I posted a link to it above. the 8.4 itself hasn't changed. its the same one I am running.