1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Anyone using the Cepek Dc-1 in a 16x8

Discussion in '2nd Gen. Tacomas (2005-2015)' started by RedskinRedTaco, Nov 17, 2009.

  1. Nov 17, 2009 at 3:57 PM

    RedskinRedTaco [OP] Well-Known Member

    Aug 16, 2009
    First Name:
    Virginia Beach, VA
    07 TRD 4x4 Offroad Crewcab
    Trifecta folding Touneau Cover, 275/70/16 LTX M/S, Running Boards, Dynamat, tint, Alpine W404 Video system w/ backup cam, Sirius Sat, Polk Audio Component Speakers frt and back, Alpine 4x50 amp. Billy's 5100's set @ 1 3/4, 1" rear blocks, Rear TSB, trimmed frt mud flaps 4", TRD Exhuast, K&N filter. Electric Brake.
    4 wheel parts recomended against me buying the dick cepek dc-1 in a 16x8. saying 9 times out of 10 most 16" after market wheels rub the brake caliper. Anyone run into this? There saying move up to the 17" which is cool, but another shop told me i cant use a 9" wide rim with my lift. I have the bilstien 5100's all the way around with them set to 1 3/4" in front and 1" blocks in the rear. I am thinking for the tire 275/70/17 michellan LTX M/S. which is only 1 size bigger than stock 32x11.5 basicly.

  2. Nov 17, 2009 at 6:20 PM

    outlawtacoma Well-Known Member

    Sep 25, 2007
    '13 Black DCSB Sport 4x4
    why did you start a new thread to ask the same question??
    anyway, I have the dc1's in 16x8. I am running 265/75/16 tires. no problems besides a slight rub when I cut it all the way to the right in reverse. other than that good to go. piss on 4wheelparts. those guys suck. if you want these wheels go here http://www.dickcepek.com/shop/index.php
To Top