ASC kicking in on corners since i installed 285's

I lifted my truck with billies set at 2.5 and got an alignment. No issues.
I just got new rims and tires installed 285/70/17, and since then there has been more than a few times when the ASC has kicked in when I am going around steady corners, for instance a off ramp, either uphill or downhill, on the gas or coasting, never when my foot is on the break. WTF?? anyone else experience this after going with bigger tires?

Thanks,

 

VSC

And yes it happens , get your skid control ecu recalubrated at your dealer .

This usually solves the problem or at least greatly reduces it .

 

http://www.tacomaworld.com/forum/showthread.php?p=691254

 

How much did you trim? If the wheel catches plastic trim under compression of the turn VSC will activate.

 

That might be a good idea. I do experience some rubbing, but only typically when I am backing up while turning. I do need to do some more trimming. I dont hear any fender rubbing prior to the VSC kicking in though when I am driving. I guess its possible that it might be slightly rubbing and immediately kicking in.

Thanks,