BHLM 4th screw help!

I really need help on figuring out how to get those 4th screws out that hold in my head light. I have got the bolt off of the back of it but i can't seem to get the actually screw itself out. I am having a really hard time and I was wondering if someone could give me some suggestions on how I can get it out. I have used a flat head screw driver to try and wiggle it out but it seems to be stuck. Both sides seem to be stuck. My truck is an 06 so maybe its rusted or something?

 

Hmm that is strange.. I doubt it could be stripped. Have you made sure you fully unscrewed it?

 

Yep the bolt is fully off. The front of the screw is flat so there is nothing I can use to really get it off. I am going to go out at try using some needle nose pliers to wiggle it out or maybe twist it. I am really hoping it works.

 

Good luck. I remember when I took mine out that 4th screw was a pain

 

Are you talking about the screw that is on the inside off to the side thats a pain the the ass to get too? If so, I just used a small ratchet and it came off pretty easily.

 

10mm ratchet.... Its really not that bad.

 

i think i know what happened! i took off the wrong one. i had to get my flash light out and there it was the one i was supposed to take off. geeze silly me. i guess this thread can be deleted. my bad

 

lol you took off the bottom screw didnt you? Yeah its the top bolt with the head facing the fender.

 

Haha, yeah I have almost done that a couple of times!! Just remember, its the one that is even more of a pain in the ass to get to then that bottom screw!!!

 

i totally did take off that bottom screw i spent so much time trying to get that one off too. gosh i feel dumb but yes the actual bolt is quite a pain. hard to get my arm in there. well i guess i am definitely off to a good start haha. wish me luck!

 

I was wondering why this seemed strange when I was talking to you about it and I had forgot that there was two lol.. Well good luck with the rest of the mod!

 

lol good luck!!

 

i did the same thing. any negative repercussions if i took the bottom bolt out?

 

i couldnt get the bottom bolt out but i did lose the nut on the end of it. so far i have had no problems with anything there.

 

What he said....