Bi-xenon Morimoto Mini Stage III Kit (D2S) Wiring Help

Hi All,

I tried doing a search on this but I couldn't find anything that helped.

I just had the Bi-xenon Morimoto Mini Stage III Kit (D2S) installed but I can't seem to get the high beams to work. When I try to activate the high's, nothing lights up. I switched the wires around and when I did that nothing lights up. I plugged the wire that says ballast to the ballast and the wire labels projector to the high beams coming out of the headlight. I don't hear anything clicking from the solenoid when I go from low to high. Does anyone have any idea's I can trouble shoot? Bad relay? Bad Ballast?

Thanks!!

 

There are 2 wires coming from the projectors; Ensure that they are hooked up, reason, they control the tilt within the projectors. Also, ensure all the factory stuff is hooked up as well (No wires will be left hanging)

 

Yeah, I made sure everything is connected. Flip-flopped the wires around too and still got nothing.

 

another thing to make sure is that the prongs are pushed in all the way thru the black adapter/clip thing.