Bilstiens and ARB leafs

just ordered billy 5100s adjustable shocks for front and shocks for rear. Going to replace the leafs with ARB leafs cs047r. Ordred it all through 4 wheel parts and im a little concerned i need different shocks in the rear. They tell me the shocks they got me are long travels. I asked because i have read numerous places that you run the arb leafs you need long travel shocks. I look up the p/n they ordered and it says standard travel. Little concerned. Also do i need carrier bearing drop? And will i get a full 3" lift for a double door tacoma with just the adjustable billys in the front with stock coils? Or do i need spacers and OME 885?

 

IIRC, if. You have rear lift, you should the Bisltein B110
How much is 4 wheel parts charging you? Wheelers is up your direction

 

Rear 5100's say 0-1" lift

 

B110 is what you need dude.

5100s are not going to work. You'll over extend them.

 

They may have meant the extended length which Im running in the rear for 3.5"-4" but I'm not familiar with that leaf pack
and you will only get 2.5" with the stock coils. I have 885 on my billies and it gave 3" but something you need to consider is if you go over 2.5" it is highly recommended to upgrade UCA's
Shouldn't need a carrier bearing drop.

 

They priced the rear shocks at 208 a set

 

I change my whole order. Went back today and got the OME all around with SPC uca's s e coils lol