Charvonia Design Bed Tie-Down Anchors

Hey guys, just wanted to share a new product I am manufacturing for our trucks. I’ve been a product designer in the Aftermarket and in Motorsports for the past 15 years. I’ve sold a bunch of these to Tundra owners, and they fit Tacoma’s too. These have been installed on 1st and 3rd gen Tacos, but I don’t see why they wouldn’t fit a 2nd gen too. Here’s all the info:

Sold in pairs ($77/pair)
Ships FREE within the US
10% Off Your 2nd Pair (automatically applied in cart)

• Application: 2011-2021 Toyota Tacoma (uses one pair, or two Bed Tie Down Anchors) Have also been installed on 1st Gen Tacoma
• Application: 2007-2021 Toyota Tundra (uses two pairs, or four Bed Tie Down Anchors)
  
• Machined 6061-T6, anodized, engraved with logo and torque spec
• Includes corrosion resistant, Grade 8.8 mounting hardware
• Replaces stock steel tie-down points that are prone to scratching and rusting
• Multiple methods for attaching ratchet straps, bungee cords, or rope
• Radius on inside to avoid cutting straps and ropes
• Center slot retains tie down straps
• T40 Torx bit required to remove the stock bolts
• M6 Hex bit required to install the new hardware
• Designed and Manufactured in the USA
• Patent Pending
• $77/pair with free shipping

Please visit my site to order: https://charvonia-design.myshopify.com/products/billet-tie-down-anchors










And why would you want these fancy new Tie-Downs?? Well this is what mine looked like, and eventually yours probably will too.

Besides looking way better than stock, my Tie-Downs also add functionality with more ways to attach ratchet straps, and a center slot that does a much better job retaining the hook so it doesn’t fall out before you tighten the ratchet strap, something that used to drive me nuts!

Thanks for looking guys, hit me with any questions you might have!

 

So will not fit a Gen2 2010? If so I’d be ordering a pair.

 

Do these only replace stock or could they be installed mid-bed?

 

Can you let me know if you have the stock anchors at the front of your bed? They would be on the side walls at the front.

 

They do replace stock but I had several people drill holes to install them wherever they wanted. You just use a fender washer and nut.

 

Ha! Guess I am wrong. Just remember seeing these in a buddies truck so assumed I had as well. Bummer they look beautiful.

 

Doesn’t fit 1st Gen huh? I

 

They do fit 1st gens, I should make that more clear in the bullet points. It’s the 2nd gen that seems to be missing the holes. As long as you have the stock U-shaped anchors these will fit.