Chirping, drivers side only at speed?

Hello,
I’ve been trying to track down this high frequency chirp on my 06 2wd manual.

It seems decoupled from the engine and it only happens above 40. I recently replaced the wheel bearing on that side so maybe I screwed up? Any advice would be greatly appreciated.

I uploaded an audio file for anyone interested: https://ufile.io/dsqun0dq

 

Most likely a bad wheel bearing. Did you go with OEM or aftermarket?

 

Thank you for the reply. I purchased Timken bearings for the front wheels…

 

I'm not sure about the older 2nd gen 5 lug, but the 6 lug models use NSK bearings. I would suggest trying to source OEM bearings if possible. Either KOYO or NSK would be ok.
This thread is mainly for 4x4 6lug. You might ask to see if he can do a 5 Lug.
https://www.tacomaworld.com/threads/wheel-bearings-hubs-press-service-oe-nsk.537080/