1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clockspring wiring

Discussion in '2nd Gen. Tacomas (2005-2015)' started by jeshore, Jul 7, 2008.

  1. Jul 7, 2008 at 2:35 PM
    #1
    jeshore

    jeshore [OP] Member

    Joined:
    Apr 9, 2008
    Member:
    #5850
    Messages:
    8
    Albuquerque
    Vehicle:
    TRD off road
    would somebody look at the back of their steering airbag and tell me what color wire goes to which connector/pin. there should be 4 wires, a black connector, and an orange connector... or better yet post a picture of it. the airbag comes off with 2 torque bit screw (one on each side of the unit) Thanks for all the help ya'll
     
  2. Jul 7, 2008 at 2:55 PM
    #2
    LRH

    LRH Well-Known Member

    Joined:
    Jul 19, 2007
    Member:
    #2159
    Messages:
    303
    GA USA
    Vehicle:
    '07 2.7L PreRunner
    I would slowly back away from that one untill you have an FSM or a good clear photo in front of you.
     
To Top