1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clunk when turning left

Discussion in 'Technical Chat' started by frenchee, Aug 18, 2016.

  1. Aug 18, 2016 at 10:14 AM
    #1
    frenchee

    frenchee [OP] Favorite Member

    Joined:
    Aug 4, 2015
    Member:
    #161024
    Messages:
    2,128
    Gender:
    Male
    Oceanside CA Area
    Vehicle:
    2003 Tacoma TRD Double Cab 4x4
    Converted to 4WD DD VW MK6 TDI
    Hello everyone.
    I have a pretty loud pop noise when I turn left at 20 ish mph. OR sometimes if I break while turning I can also hear it.
    I dont think it has happened turning right. It does sound like its coming from the driver side.
    I think its the cv joint. What would cause my cv to make noise like that?
    It happens in 2wd with the Cv's disconnected. I have not tried to hear in in 4wd cus its been dry here.

    Thanks
    Francois
     
  2. Aug 18, 2016 at 6:23 PM
    #2
    tan4x4

    tan4x4 Well-Known Member

    Joined:
    Nov 30, 2011
    Member:
    #67982
    Messages:
    3,809
    Gender:
    Male
    First Name:
    Rick
    Folsom, CA
    Vehicle:
    99 Tacoma EC 4x4 2.7L Auto
    Bilsteins, OME 881's, 3-leaf AAL, Detroit TruTrac, Tundra brake swap, Michelin LTX AT2, Tranny skidplate, TC skidplate, CBI rear bumper, TG sliders, UltraGauge, PowerTank, Reverse Camera
    Could be a bad anti-sway bar bushing, or steering rack bushing.
    Gotta get under there and take a look.
     
    verynearlypure likes this.
  3. Aug 19, 2016 at 7:09 AM
    #3
    98tacoma27

    98tacoma27 is going full "SANDWICH" Moderator

    Joined:
    Dec 18, 2008
    Member:
    #11714
    Messages:
    67,725
    Gender:
    Male
    First Name:
    Ben
    Not Beech Creek
    Vehicle:
    05 Tundra SR5 (+295k AND COUNTING), 2006 F350 King Ranch 6.0L
    Some stuff. Not a lot, just some.
    A tear in the cv boot will cause that noise as all the grease leaves the joint.
     
  4. Aug 19, 2016 at 7:14 AM
    #4
    totmacher

    totmacher automotive hypochondriac

    Joined:
    Sep 7, 2009
    Member:
    #22430
    Messages:
    4,663
    Gender:
    Male
    First Name:
    Daniel
    TN (memphis-ish)
    Vehicle:
    4Runner, Tundra
    Cut & broke off some stuff.
    Lower control arm bushing maybe. Or alignment cam needs tightened.
     
  5. Aug 19, 2016 at 7:25 AM
    #5
    tan-ishman

    tan-ishman Well-Known Member

    Joined:
    Jul 27, 2015
    Member:
    #160442
    Messages:
    414
    Gender:
    Male
    San Diego,CA
    Vehicle:
    2005 DCSB
    a bunch of new/used parts....and some skids.
    CV's would still make some noise, even if you're in 2wd as the wheels are still turning. just squat down with the wheels turned to the side a take a look at the CV boots from the side. if you can't see a tear, just slide your hand over the boot and feel for a bunch of grease. Mine have been torn but I never saw the tear in the folds of rubber.
     
  6. Aug 28, 2016 at 5:22 PM
    #6
    frenchee

    frenchee [OP] Favorite Member

    Joined:
    Aug 4, 2015
    Member:
    #161024
    Messages:
    2,128
    Gender:
    Male
    Oceanside CA Area
    Vehicle:
    2003 Tacoma TRD Double Cab 4x4
    Converted to 4WD DD VW MK6 TDI
    My steering rack bushings are completely shot. The rack moves a lot when the car is jacked up and I move the wheels.
    Im going to replace em see what happens.

    No tear. Just installed em. But they did not make noise initially. This is a couple weeks after install.

    I'll look into this thanks

    No tear that I can see.
     
  7. Sep 11, 2018 at 8:40 PM
    #7
    Junetaco03

    Junetaco03 Well-Known Member

    Joined:
    Aug 16, 2014
    Member:
    #136283
    Messages:
    626
    Gender:
    Male
    Bay Area, California
    Vehicle:
    2003 Tacoma TRD 4x4
    ARB bull bar bumper, led off road lights, 8000lb winch, factor 55, trd headers, ARB air compressor
    Did changing the steering rack bushings fix the issue? I'm having similar issues with my 2003 Tacoma double cab when i turn left driving slowly only like parking or reversing also I'm hearing popping noises while driving in the street around 20-30 mph. how did you test your steering rack? the bushings on mine look fine. But I am sure theirs a way to do a test on these. Appreciate the help...
     
  8. Sep 11, 2018 at 8:59 PM
    #8
    frenchee

    frenchee [OP] Favorite Member

    Joined:
    Aug 4, 2015
    Member:
    #161024
    Messages:
    2,128
    Gender:
    Male
    Oceanside CA Area
    Vehicle:
    2003 Tacoma TRD Double Cab 4x4
    Converted to 4WD DD VW MK6 TDI
    Hey. The clunk is gone.
    I didn’t pay attention to see if it was from the bushings. Long time ago now.
    It’s really easy to check. You need 2 people or a camera. One person turning the steering wheel and one person/camera looking at the rack. The rack will violently move when you turn the wheel if bushings r bad.
    Quick test.
     
  9. Sep 11, 2018 at 9:06 PM
    #9
    Junetaco03

    Junetaco03 Well-Known Member

    Joined:
    Aug 16, 2014
    Member:
    #136283
    Messages:
    626
    Gender:
    Male
    Bay Area, California
    Vehicle:
    2003 Tacoma TRD 4x4
    ARB bull bar bumper, led off road lights, 8000lb winch, factor 55, trd headers, ARB air compressor
    Ok cool thanks for the tip ill do the test tomorrow, did you jack up the car for the test?
     
  10. Sep 11, 2018 at 11:06 PM
    #10
    frenchee

    frenchee [OP] Favorite Member

    Joined:
    Aug 4, 2015
    Member:
    #161024
    Messages:
    2,128
    Gender:
    Male
    Oceanside CA Area
    Vehicle:
    2003 Tacoma TRD Double Cab 4x4
    Converted to 4WD DD VW MK6 TDI
    You should see it either way. Jacked up or on the ground
     

Products Discussed in

To Top