1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cruise control won't engage

Discussion in '1st Gen. Tacomas' started by morse764, Jun 25, 2008.

  1. Jun 25, 2008 at 8:42 PM
    #1
    morse764

    morse764 [OP] Member

    Joined:
    Jun 9, 2007
    Member:
    #1794
    Messages:
    20
    Vehicle:
    03 Sr5 4x4 3.4L v6 tacoma
    sport TRD clutch, 77 series K&N intake, Trac-Rac, Borla exhaust, Air-Raid throttle body, T-ko BF goodrich tires, 7ft fischer plow
    I have an 03 tacoma with cruise control, which has been working fine until i took it in for its 50,000 mile check up. The dealer insisted that it was the switch so they replaced that for $216 and turns out it wasn't the switch and they still charged me. And then they said it was the ecm and that it would have to replace but i didn't, so i left it at that. But the odd thing is that the cruise control does not blink when you turn it on, however it does not engage at all when you press on the switch. Any solutions?
     
To Top