1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Is 4 cylinder 2.4/2.7 ECM reprogramming/tuning possible? Project Snowball >>> keywords 4.88 4.88:1 gear install clam clamshell TrailMaster 90385-110 33501G Recommendations regarding transmission oil filters As if you need another turn signal mod thread How to hook up center brake light from topper Replacement front Lift strut?

Denso Gap

Discussion in '1st Gen. Tacomas (1995-2004)' started by twfsa, May 16, 2011.

  1. May 16, 2011 at 5:02 PM
    #1
    twfsa

    #1
    twfsa [OP] Well-Known Member

    Joined:
    May 29, 2010
    Member:
    #37997
    Messages:
    1,342
    Gender:
    Male
    First Name:
    Tom
    Omaha Ne
    Vehicle:
    04 TRD 4X4
    881 Front coils, Bilstien 5100's all the way front set to "0" Icon Dynamic's mini leafs in rear, stock tires.
    The denso plug has a U shape electrode.
    [​IMG]

    If you check the gap with a flat feeler guage and not in the center of the U you get a tight reading,its closer to what the book calls for when a wire guage is used in the center of the U electrode.

    The service manual calls for 0.043 gap I need a wire guage so to accurately gap the plugs, as I don't trust being gaped at the factory, as the plug is used in other applications.

    Some may say it doesn't make that much difference but its alot of work to change them out so just as well do it right!

    [​IMG]
     
    twfsa, May 16, 2011
    #1
To Top