1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

dick cepek wheels centering ring?

Discussion in 'Wheels & Tires' started by ellsworth, May 3, 2008.

  1. May 3, 2008 at 5:11 AM
    #1
    ellsworth

    ellsworth [OP] Well-Known Member

    Joined:
    Aug 15, 2007
    Member:
    #2433
    Messages:
    96
    Buffalo
    Vehicle:
    08' off rd 6 speed
    6 inch Fabtech, st stabilizers, 18x9 DC -1s 305/65/18 bfg at's
    OK I rotated my wheels yesterday..Why id there no centering ring? Is it common to use the bulge acorn nuts to center the wheel to hub? Also,anyone have trouble getting some positive caster into ther 05+ with a 3" kit in the front? I can get the camber close but dont have enough cam space to build some positive caster?
     
  2. Jun 17, 2008 at 12:50 PM
    #2
    Banchi94

    Banchi94 Well-Known Member

    Joined:
    May 13, 2008
    Member:
    #6599
    Messages:
    472
    Gender:
    Male
    First Name:
    Ron
    Parker, CO
    Vehicle:
    2008 Indigo Blue TRD Sport DCSB 4x4
    ToyTec 3" basic lift
    Hi ellsworth,

    For Dick Cepek wheels, the centering ring is not needed on 05-08 Tacos. Check this out: http://www.dickcepek.com/DickCepekWheelGuide.pdf

    Not sure about your alignment questions. I have a 3" ToyTec lift and had my installer take it to Big-O Tires, and they had no problems getting the alignment done.

    Hope that helps out a bit.
     
To Top