1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

diff lock?

Discussion in 'Technical Chat' started by trd4us, May 11, 2008.

  1. May 11, 2008 at 11:03 AM
    #1
    trd4us

    trd4us [OP] Active Member

    Joined:
    May 10, 2008
    Member:
    #6528
    Messages:
    29
    va
    Vehicle:
    08 trd and 2009 reg cab
    08 trd, daystar leveling kit, k&n fipk, 285/75/16 pro comp x terrains, spidertrax wheel spacers, flowmaster 40 series exhuast.the 2009 is stock only 130 miles
    anyone know how to make the factory diff locker work in other than 4lo?
     
  2. May 11, 2008 at 12:18 PM
    #2
    RoadKill

    RoadKill Northern Alliance: padawan

    Joined:
    Apr 1, 2008
    Member:
    #5679
    Messages:
    126
    North of the border
    Vehicle:
    First gen 4x4
    285x70x17 offset rims+ 1.5 spacers, rear Timbrens + 3 inch lift add a leaf, Sway-a-way coilovers + camburg control arms, Fender flares (2.5 inch), clear lights, headers, sliders, roll bar
  3. May 11, 2008 at 8:16 PM
    #3
    sapper mp 03

    sapper mp 03 Member

    Joined:
    Mar 17, 2008
    Member:
    #5356
    Messages:
    14
    Ft Richardson, Alaska
    Vehicle:
    08 TRD
    TRD seat covers, debadged, defroster mod, locker
    can some one help. im trying to do this mod, but everytime i do it, all i do is blow fuse after fuse. when you cut the wire which ends are you using. the ones from the ecu or the from the wire harness. i have figured out the switch one is form the harness but what about the others. can some one help before i miss someting up. this is on a 2008. thanks for the help.
     
To Top