DIY - CHEAP BEEP on lock

Well, that's disappointing. I was going to PM you and ask you to re-post the pics. Any chance you can cruise over to Georgia to give a hand.

 

I cant see your pics!!!

 

I cant see your pics!! (

 

I think he died

 

I know this is an old thread but if you don't like the sound emitting from your speak add a resistor in and it will change it. Different resistors will give you different effects.

 

Damn, I really wanted to do this... :/

 

cool pics. i fully understand now

 

So question. Mine is a 10 and had the beep lock two beeps unlock. I just had a Viper remote start installed today and when it unlocks and lock it won't beep anymore. Any way I could tap into the factory beeper again. The installer told me the data bus he installer to get past the immobilizer is what disabled it. But still works with my factory key fob just not with my new remote start fob

 

got it!!!!!!!! Just set the remote start system to 20ms pulse and works great. Can also hook up the horn. I think the horn was quieter so went that route.

 

Whats the part number for the radio shack piezo that sounds like the OEM "beep" on most toyotas?

 

Where at in OR.? I'm in Eugene, could be a fun day trip to get the pics back up.

 

Alternative links w/info+pics.

https://www.tacomaworld.com/threads...rl-and-alternating-turn-signal-modders.32640/
Page three has good info about tapping into it under the dash.

 

i see the alternate link here ^^^^. But is there a way to chirp only on the lock phase and not the unlock phase?

 

Using the blue w/ pink stripe makes it beep on lock only.

 

I got a radioshack piezo but it didn't sound close to factory. Call me anal, but I wanted the same beep as my old Tundra had. Luckily, I found out where to get one that sounds the same, it may even be the one Toyota uses? Anyway, if you want the factory beep, go to floydbell.com and order an M80-W, its 8 bucks but it sounds exactly like the factory piezo and it is loud. It claims 103db.

 

Are these photos saved anywhere? They are no longer uploaded.

Thanks

 

second...

 

Why can't u just go from the door lock switch to the horn, every time u hit the lock button the horn will sound?

 

So I just went from the blue/pink wire on driver kick panel, from the door, to the horn and it works like a charm, only toots when locking either from the fob or the driver switch