Does anybody miss the manual clock in the center dash?

I'd be interested in trading non-clock for 12-14 clock/hazard, if anyone is interested. A longshot, I know.

 

Best place to ask is in the main 2nd gen B/S/T section. That's how I traded mine with another member.

 

I searched all the junkyards and eBay and just about everyone told me they sell them immediately, I just happened to get lucky to call a place the same day they got a truck in.

 

Adio, do you what the part number for the center clock with the blue or white clock display like in your pictures. I do not want the orange numbers.
Thanks in advances

 

84332-04100 is for the 12-14 Clock with the correct background color for our trucks
82998-12690 is for the repair wire terminals and you need 2

 

@TRDProBuddy ^^^ there you go. Thanks @shakerhood

 

Thanks, going to attempt this mod

 

So I looked and the part number listed for 2014 is 8433204100. I
Here is the link,, http://parts.camelbacktoyota.com/parts/2014/Toyota/Tacoma/index.cfm?action=partDetail&section=BODY HARDWARE&group=INSTRUMENT PANEL&subgroup=CLUSTER & SWITCHES&component=Hazard switch&partnumber=8433204100&vehicleid=411723&siteid=214329

I looked and the part number in previous post (84332-04100) is for a 2015

 

Yeah they are not cheap, that's why they are so hard to find in the junkyards.

 

my bad, confused myself with numbers

 

I did this MOD too. It was easy and straight forward. However, I went a step further and added length to the repair wires and tapped them much further in and slipped them through the stock insulation so it looks like the wires were stock. I had to to this because I have CDO. CDO is just OCD, but I just have to alphabetize the letters!

 

Nice job. (CDO, good one )

 

I want to do this so bad, but I'm a total dip sh*t when it comes to wires. Gunna have to risk it for the biscuit!

 

Pretty straight forward and an easy mod. Just follow the write up and you'll be good to go.

Top wire terminals is what I used instead of getting a pair from a Toyota parts site, which is pricey. Let me know if you want a pair, I can send you one. Worked perfect for me.

 

Manual clock? Do you have to wind it?
I think you mean analog

 

Yes please if you wouldn't mind adio.. What is the difference between the top wire terminals and the parts from Toyota if u don't mind explaining?

 

Toyota ones are pricey since it is oem, best price that I could find on just 1 terminal repair wire(82998-12690) was 15$. I salvage these from a DRL module that I ran on my 08. Just offering some out there.

PM me your info and I'll send it out tomorrow.

 

Adio, Do you have a part number or trade name for the "top wire terminals". Trying to find them from a supplier on the internet. Did find these, but not sure they are correct. http://www.waytekwire.com/item/30475/Delphi-15304719-GT-280-Series-18-16-GA-Sealed/
Thanks.

 

NM. Think I found them. http://www.repairconnector.com/gm-oe-metri-pack-280-series-female-terminal-repair-18-14-ga/

 

Sorry, I wouldn't know because I salvage those terminals from a DRL module that I ran on my 08.