Experience with Taco tunes 2017 tacoma

Does anyone have any experience with a sub install from taco tunes? managed to get everything installed but in my kit came 2 fuse housing and 2 fuses, one is a 50A and the other is a 100A, i dont know which one goes right by the battery and where the other one goes.

 

What is the total amperage draw of the amplifier you are using? You should see blade fuses installed in your amplifier and that's your total or you should have a product manual that tells you.

General rule of thumb is the higher amperage fuse goes near the battery terminal and smaller fuses, if you have a distribution block, down the line near the amp.

 

If you don't have a manual or the manual doesn't tell you what amperage fuse to use, just contact the manufacturer of the amp for the info. You don't want to put a 100amp fuse if the amp is only uses 40amps.

 

Got in contact with customer support and they said the 100A goes near the battery and the 50A goes right before the amp. Both fuses on the same power wire.