fan blowerr not working.

09 tacoma blower speed switch was working fine. I took out assembly to check the AC switch to see if it was good. Did this as I was checking for a different problem with the AC compressor magnetic gear. before I knew it was working correctly. I put heater/ac assembly back together and plugged it back in. Now the fan speed switch does not turn on the fan blower motor. and AC switch light does not come on? checked fuses in enginge compartment. any suggestions would help. Is there a hidden fan blower fuse I dont know about?

 

not to imply your incompetent but are you sure you plugged it back in.

 

ok, here's what the problem was. the front part of the clutch has a pressed on center that holds the spline shaft in place. the center came unpressed and it caused the clutch to move out of center and stop the free spinning belt pulley from turning. I bought a used AC compressor with 79 K on it.(for sale) $200. I removed the front portion of the clutch and installed it. No more bindding of the pulley. AC works again.