FEND-X Tacoma Wheel Liners

TacomaWorld!!
____________________________________________________

Featuring the most extreme, completely custom Tacoma wheel liner!​

FEND-X Wheel Liners

​

FEND-X Wheel Liners. Gear built to fend off the harshest conditions! Our Wheel Liners are on the verge of indestructible, yet incredibly flexible. Fend-X Liners are laid with unique molecular properties that can withstand the most extreme weather conditions.

• Custom Designed
• Reduce Road Noise
• Tire Clearance Gains
• Waterproofing Barrier
• Superior Impact Strength
• Extreme UV & Chemical Resistance

FEND-X Liners are built for the wild. Gear engineered for maximum protection while maintaining proper ventilation / airflow to the engine intake. Features a super slick surface which makes pressure cleaning the wheel wells effortless. FEND-X Liners create the perfect backdrop for any aftermarket setup. We’ve upgraded every aspect of the traditional stock wheel liner by increasing the coverage, durability and aesthetics! Our Gear responds extremely well to heat / cold-forming while retaining memory (shape) and structural integrity.

(1) Fend-X Wheel Liner
6 ft Length x 2 ft Width x 1/8" Thickness
Dimensions vary based on configuration*

100% custom made in Colorado!

Available to Order@ www.geartechcustoms.com​

Gear Tech Customs designs & manufactures Fend-X Wheel Liners and PROTEC Splash Guards. Combined provides the ultimate engine/wheel well protection in one package.

Properly disposed of Stock Liners

 

How much space do these lines give you over the stock ones near the cab mount where most tires rub?

 

do you have a template for use with plate bumpers? i have a pelfrey and wouldn't mind something to help cover up the area below the headlight.

 

1 inch +/- gain. Pics should show the area in question here, this is the Wheel Clearance allowed with 285s / no CMC / Factory Fender Flares = Zero rubbing on Wheel Liner.

We have an ARB bump on 3rd Gen but can cut Liners to spec for any bumper. Got a pic of the area?

 

ill try take a pic tomorrow

 

Interested. I don’t see any mouthing holes in the liner, does it just sit up in place inside the wheel well? Sick of dirt/mud getting flung up into my engine bay because of no liners. Is Aug 8th when they are shipping?

 

Correct, the wheel liner holds itself in place based on our design span from fender to frame. This in effect locks it from any side to side motion.

Oem fenders have inward tabs that the fender flares will reattach too once the oem liner is removed. The Fend-X liner can run above these tabs and along the edge of the entire fenderwell. (Follow outer edges in pic below)




Nowadays, no two Tacomas are alike which is primarily why you see no mounting holes. Mounting possibilities are endless with the Fend-X liners, and can be tailor to any Build.

August 8 is end date of Prezorder session. Shipping is set to start week of August 12-18, for orders placed week of July 8-14 and proceed in weekly waves until current on pre-orders. At that point, there will be established lead times listed on product page.

 

I feel like some voodoo shit is going on to keep those things from drooping in....

What kind of magic are y'all using!?

 

NSA

Our photos show liners mounted with zero hardware to depict its versatility. That said, we still recommend anchoring the Fend-X liner spaced out 2-4 points max. Any over that threshold is overkill because liner will retain shape and never drooop

 

a few days late. had a hard time getting a good angle. not sure if these pics help

 

The underside of bumper would remain exposed based on how aggressive it angles forward. Could have 2 shields fabricated given the dimensions

 

i think I'll just try out the design you already have and see if i can fold the forward section up. with all the discounts you're offering it's kinda worth it to just give it a try. which give me the most material to work with? the aftermarket bumper one or the factory bumper version? thanks

 

Factory Bump option is longer and would give you the most material to work with!

 

First and foremost, BIG thank you for the support and patience throughout the process! I'm relieved to announce that all pre-orders placed during July 7-26th are scheduled to ship Weds. Sept. 5th! All remaining pre-orders placed between July 27th - August 12th, will likely ship Sept. 12th. Following each shipment, all orders will receive tracking information and shipping confirmations, these notifications will be delivered via email and derived directly from the website!

 

(15) Fend-X sets hit the streets last week. Pre-orders placed between July 7-26 have shipped! Check e-mail inboxes for confirmations & tracking

 

This is awesome. I will need this at some point in the future. My liners are chopped up and could use replacing. Subbed!

 

good. i'm tired of getting mud, dirt and debris on the inside of my wheel wells.... Hurry please!

 

Think of getting a set of these and wanted to hear feedback from those of you that have received and installed yours. Pics would be great!

 

i'll let you know when they get here. then i'll install.

 

Seen a few different install photos floating around, I'll try to compile some